F(x)tec Pro1X comes with PCA9534 IO Expander, it is used for enabling touch screen VDD/VDDIO and keyboard's caps lock LED. Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Signed-off-by: Dang Huynh <danct12@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 3eecdc76bcac..993e7cfffae2 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -70,6 +70,23 @@ &dispcc { status = "disabled"; }; +&gpi_dma0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + /* Clock frequency was not specified downstream, let's park it to 100 KHz */ + clock-frequency = <100000>; + + pca9534: gpio@21 { + compatible = "nxp,pca9534"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &pm6125_gpios { vol_up_n: vol-up-n-state { pins = "gpio5"; @@ -89,6 +106,10 @@ &pon_resin { status = "okay"; }; +&qupv3_id_0 { + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; -- 2.45.2