DT bits required for HDMI TX support in qcom APQ8098 (MSM8998 cousin) --- Changes in v7: - prefix the labels hdmi: and hdmi_phy: with mdss_ (Konrad) - DID NOT MODIFY patch 3, based on conversation between Conor & Dmitry - tested 40+40 boots with/without maxcpus=1 => no iommu panic witnessed - Collect tags from Konrad & Dmitry (hopefully b4 did the right thing) - Link to v6: https://lore.kernel.org/r/20240715-hdmi-tx-v6-0-d27f029627ad@xxxxxxxxxx Changes in v6: - Fold HDMI PHY driver submission into this series => [PATCH v2] drm/msm: add msm8998 hdmi phy/pll support => Link to v2: https://lore.kernel.org/all/20240704-hdmi-phy-v2-1-a7f5af202cb5@xxxxxxxxxx/ - Rebase onto v6.10 - Move drivers/gpu/drm/msm/hdmi/hdmi.xml.h to drivers/gpu/drm/msm/registers/display/hdmi.xml - Add copyright attribution - Remove all dead/debug/temporary code => Link to v1: https://lore.kernel.org/all/63337d63-67ef-4499-8a24-5f6e9285c36b@xxxxxxxxxx/ - split HDMI PHY driver patch in 2 parts (PHY & TX) - Use same regulator names as msm8996 (Dmitry) - Remove printk statements - Add Vinod's Ack on patch 1 - Expand commit message on patch 4 = HDMI PHY driver - Link to v5: https://lore.kernel.org/r/20240627-hdmi-tx-v5-0-355d5c1fbc3c@xxxxxxxxxx Changes in v5: - Fix property & property-names for TX pinctrl in DTSI (Konrad) - NOT CHANGED: clock trees for TX & PHY based on Dmitry & Jeffrey's remarks - Link to v4: https://lore.kernel.org/r/20240613-hdmi-tx-v4-0-4af17e468699@xxxxxxxxxx Changes in v4: - Collect tags since v3 - Reword patch 1 subject (Vinod) - Link to v3: https://lore.kernel.org/r/20240606-hdmi-tx-v3-0-9d7feb6d3647@xxxxxxxxxx Changes in v3 - Address Rob's comments on patch 2: - 'maxItems: 5' for clocks in the 8996 if/then schema - match the order of 8996 for the clock-names in common --- Arnaud Vrac (2): drm/msm: add msm8998 hdmi phy/pll support arm64: dts: qcom: add HDMI nodes for msm8998 Marc Gonzalez (4): dt-bindings: phy: add qcom,hdmi-phy-8998 dt-bindings: display/msm: hdmi: add qcom,hdmi-tx-8998 drm/msm/hdmi: add "qcom,hdmi-tx-8998" compatible arm64: dts: qcom: msm8998: add HDMI GPIOs .../devicetree/bindings/display/msm/hdmi.yaml | 28 +- .../devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml | 1 + arch/arm64/boot/dts/qcom/msm8998.dtsi | 128 +++- drivers/gpu/drm/msm/Makefile | 1 + drivers/gpu/drm/msm/hdmi/hdmi.c | 1 + drivers/gpu/drm/msm/hdmi/hdmi.h | 8 + drivers/gpu/drm/msm/hdmi/hdmi_phy.c | 5 + drivers/gpu/drm/msm/hdmi/hdmi_phy_8998.c | 779 +++++++++++++++++++++ drivers/gpu/drm/msm/registers/display/hdmi.xml | 89 +++ 9 files changed, 1037 insertions(+), 3 deletions(-) --- base-commit: 003a26f5074bfe024603cf76f8fd486a5344f307 change-id: 20240606-hdmi-tx-00ee8e7ddbac Best regards, -- Marc Gonzalez <mgonzalez@xxxxxxxxxx>
