Re: [PATCH v3 2/2] PCI: qcom: Avoid DBI and ATU register space mirror to BAR/MMIO region

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Subject:

PCI: qcom: Disable mirroring of DBI and iATU register space in BAR/MMIO region

On Tue, Jul 23, 2024 at 07:27:19PM -0700, Prudhvi Yarlagadda wrote:
> PARF hardware block which is a wrapper on top of DWC PCIe controller
> mirrors the DBI and ATU register space. It uses PARF_SLV_ADDR_SPACE_SIZE
> register to get the size of the memory block to be mirrored and uses
> PARF_DBI_BASE_ADDR, PARF_ATU_BASE_ADDR registers to determine the base
> address of DBI and ATU space inside the memory block that is being
> mirrored.
> 
> When a memory region which is located above the SLV_ADDR_SPACE_SIZE
> boundary is used for BAR region then there could be an overlap of DBI and
> ATU address space that is getting mirrored and the BAR region. This
> results in DBI and ATU address space contents getting updated when a PCIe
> function driver tries updating the BAR/MMIO memory region. Reference
> memory map of the PCIe memory region with DBI and ATU address space
> overlapping BAR region is as below.
> 
>                         |---------------|
>                         |               |
>                         |               |
>         ------- --------|---------------|
>            |       |    |---------------|
>            |       |    |       DBI     |
>            |       |    |---------------|---->DBI_BASE_ADDR
>            |       |    |               |
>            |       |    |               |
>            |    PCIe    |               |---->2*SLV_ADDR_SPACE_SIZE
>            |    BAR/MMIO|---------------|
>            |    Region  |       ATU     |
>            |       |    |---------------|---->ATU_BASE_ADDR
>            |       |    |               |
>         PCIe       |    |---------------|
>         Memory     |    |       DBI     |
>         Region     |    |---------------|---->DBI_BASE_ADDR
>            |       |    |               |
>            |    --------|               |
>            |            |               |---->SLV_ADDR_SPACE_SIZE
>            |            |---------------|
>            |            |       ATU     |
>            |            |---------------|---->ATU_BASE_ADDR
>            |            |               |
>            |            |---------------|
>            |            |       DBI     |
>            |            |---------------|---->DBI_BASE_ADDR
>            |            |               |
>            |            |               |
>         ----------------|---------------|
>                         |               |
>                         |               |
>                         |               |
>                         |---------------|
> 
> Currently memory region beyond the SLV_ADDR_SPACE_SIZE boundary is not
> used for BAR region which is why the above mentioned issue is not
> encountered. This issue is discovered as part of internal testing when we
> tried moving the BAR region beyond the SLV_ADDR_SPACE_SIZE boundary. Hence
> we are trying to fix this.
> 
> As PARF hardware block mirrors DBI and ATU register space after every
> PARF_SLV_ADDR_SPACE_SIZE (default 0x1000000) boundary multiple, write
> U32_MAX (all 0xFF's) to PARF_SLV_ADDR_SPACE_SIZE register to avoid
> mirroring DBI and ATU to BAR/MMIO region. Write the physical base address
> of DBI and ATU register blocks to PARF_DBI_BASE_ADDR (default 0x0) and
> PARF_ATU_BASE_ADDR (default 0x1000) respectively to make sure DBI and ATU
> blocks are at expected memory locations.
> 
> The register offsets PARF_DBI_BASE_ADDR_V2, PARF_SLV_ADDR_SPACE_SIZE_V2
> and PARF_ATU_BASE_ADDR are applicable for platforms that use PARF

There is no 'PARF Qcom IP', just 'Qcom IP'. Here and below.

> Qcom IP rev 1.9.0, 2.7.0 and 2.9.0. PARF_DBI_BASE_ADDR_V2 and
> PARF_SLV_ADDR_SPACE_SIZE_V2 are applicable for PARF Qcom IP rev 2.3.3.
> PARF_DBI_BASE_ADDR and PARF_SLV_ADDR_SPACE_SIZE are applicable for PARF
> Qcom IP rev 1.0.0, 2.3.2 and 2.4.0. Updating the init()/post_init()

Use imperative tone in commit message. s/Updating/Update

> functions of the respective PARF versions to program applicable
> PARF_DBI_BASE_ADDR, PARF_SLV_ADDR_SPACE_SIZE and PARF_ATU_BASE_ADDR
> register offsets. And remove the unused SLV_ADDR_SPACE_SZ macro.
> 
> Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@xxxxxxxxxxx>
> Reviewed-by: Mayank Rana <quic_mrana@xxxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 62 +++++++++++++++++++-------
>  1 file changed, 45 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 0180edf3310e..6976efb8e2f0 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -45,6 +45,7 @@
>  #define PARF_PHY_REFCLK				0x4c
>  #define PARF_CONFIG_BITS			0x50
>  #define PARF_DBI_BASE_ADDR			0x168
> +#define PARF_SLV_ADDR_SPACE_SIZE		0x16C

Use lowercase for hex.

Rest LGTM! With above mentioned changes,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

- Mani

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux