Add compatible for the KX022-1020 accelerometer [1] using the KX022-1023 [2] register map as both have an identical i2c interface. [1]: https://kionixfs.azureedge.net/en/datasheet/KX022-1020%20Specifications%20Rev%2012.0.pdf [2]: https://kionixfs.azureedge.net/en/datasheet/KX023-1025%20Specifications%20Rev%2012.0.pdf Signed-off-by: Rayyan Ansari <rayyan@xxxxxxxxx> --- drivers/iio/accel/kxcjk-1013.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index 8280d2bef0a3..b76df8816323 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -173,6 +173,7 @@ enum kx_chipset { KXCJ91008, KXTJ21009, KXTF9, + KX0221020, KX0231025, KX_MAX_CHIPS /* this must be last */ }; @@ -580,8 +581,8 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data) return ret; } - /* On KX023, route all used interrupts to INT1 for now */ - if (data->chipset == KX0231025 && data->client->irq > 0) { + /* On KX023 and KX022, route all used interrupts to INT1 for now */ + if ((data->chipset == KX0231025 || data->chipset == KX0221020) && data->client->irq > 0) { ret = i2c_smbus_write_byte_data(data->client, KX023_REG_INC4, KX023_REG_INC4_DRDY1 | KX023_REG_INC4_WUFI1); @@ -1507,6 +1508,7 @@ static int kxcjk1013_probe(struct i2c_client *client) case KXTF9: data->regs = &kxtf9_regs; break; + case KX0221020: case KX0231025: data->regs = &kx0231025_regs; break; @@ -1712,6 +1714,7 @@ static const struct i2c_device_id kxcjk1013_id[] = { {"kxcj91008", KXCJ91008}, {"kxtj21009", KXTJ21009}, {"kxtf9", KXTF9}, + {"kx022-1020", KX0221020}, {"kx023-1025", KX0231025}, {"SMO8500", KXCJ91008}, {} @@ -1724,6 +1727,7 @@ static const struct of_device_id kxcjk1013_of_match[] = { { .compatible = "kionix,kxcj91008", }, { .compatible = "kionix,kxtj21009", }, { .compatible = "kionix,kxtf9", }, + { .compatible = "kionix,kx022-1020", }, { .compatible = "kionix,kx023-1025", }, { } }; -- 2.45.2
