On Tue, Jul 09, 2024 at 09:58:18AM GMT, Slark Xiao wrote:
> Since we implement the FIREHOSE channel support in foxconn mhi
> channels, that means each product which use this channel config
> would support FIREHOSE. But according to the trigger_edl feature,
> we need to enable it by adding '.edl_trigger = true' in device
> info struct.
> Also, we update all edl image path from 'qcom' to 'fox' in case of
> conflicting with other vendors.
Separate patches please. Also don't use "we", just an imerative style:
do this and that.
>
> Signed-off-by: Slark Xiao <slark_xiao@xxxxxxx>
> ---
> drivers/bus/mhi/host/pci_generic.c | 20 ++++++++++++++------
> 1 file changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index 14a11880bcea..440609b81e57 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -433,8 +433,8 @@ static const struct mhi_controller_config modem_foxconn_sdx72_config = {
>
> static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = {
> .name = "foxconn-sdx55",
> - .fw = "qcom/sdx55m/sbl1.mbn",
> - .edl = "qcom/sdx55m/edl.mbn",
> + .edl = "fox/sdx55m/prog_firehose_sdx55.mbn",
qcom/sdx55m/foxconn/prog_firehose_sdx55.mbn
> + .edl_trigger = true,
> .config = &modem_foxconn_sdx55_config,
> .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> .dma_data_width = 32,
> @@ -444,8 +444,8 @@ static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = {
>
> static const struct mhi_pci_dev_info mhi_foxconn_t99w175_info = {
> .name = "foxconn-t99w175",
> - .fw = "qcom/sdx55m/sbl1.mbn",
> - .edl = "qcom/sdx55m/edl.mbn",
> + .edl = "fox/sdx55m/prog_firehose_sdx55.mbn",
Is it the same file as the one mentioned in the previous chunk or is it
different?
If they are different, then, please,
qcom/sdx55m/foxconn/t99w175/prog_firehose_sdx55.mbn
> + .edl_trigger = true,
> .config = &modem_foxconn_sdx55_config,
> .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> .dma_data_width = 32,
> @@ -455,8 +455,8 @@ static const struct mhi_pci_dev_info mhi_foxconn_t99w175_info = {
>
> static const struct mhi_pci_dev_info mhi_foxconn_dw5930e_info = {
> .name = "foxconn-dw5930e",
> - .fw = "qcom/sdx55m/sbl1.mbn",
> - .edl = "qcom/sdx55m/edl.mbn",
> + .edl = "fox/sdx55m/prog_firehose_sdx55.mbn",
> + .edl_trigger = true,
> .config = &modem_foxconn_sdx55_config,
> .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> .dma_data_width = 32,
> @@ -466,6 +466,8 @@ static const struct mhi_pci_dev_info mhi_foxconn_dw5930e_info = {
>
> static const struct mhi_pci_dev_info mhi_foxconn_t99w368_info = {
> .name = "foxconn-t99w368",
> + .edl = "fox/sdx65m/prog_firehose_lite.elf",
> + .edl_trigger = true,
> .config = &modem_foxconn_sdx55_config,
> .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> .dma_data_width = 32,
> @@ -475,6 +477,8 @@ static const struct mhi_pci_dev_info mhi_foxconn_t99w368_info = {
>
> static const struct mhi_pci_dev_info mhi_foxconn_t99w373_info = {
> .name = "foxconn-t99w373",
> + .edl = "fox/sdx65m/prog_firehose_lite.elf",
> + .edl_trigger = true,
> .config = &modem_foxconn_sdx55_config,
> .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> .dma_data_width = 32,
> @@ -484,6 +488,8 @@ static const struct mhi_pci_dev_info mhi_foxconn_t99w373_info = {
>
> static const struct mhi_pci_dev_info mhi_foxconn_t99w510_info = {
> .name = "foxconn-t99w510",
> + .edl = "fox/sdx24m/prog_firehose_sdx24.mbn",
> + .edl_trigger = true,
> .config = &modem_foxconn_sdx55_config,
> .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> .dma_data_width = 32,
> @@ -493,6 +499,8 @@ static const struct mhi_pci_dev_info mhi_foxconn_t99w510_info = {
>
> static const struct mhi_pci_dev_info mhi_foxconn_dw5932e_info = {
> .name = "foxconn-dw5932e",
> + .edl = "fox/sdx65m/prog_firehose_lite.elf",
> + .edl_trigger = true,
> .config = &modem_foxconn_sdx55_config,
> .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> .dma_data_width = 32,
> --
> 2.25.1
>
--
With best wishes
Dmitry
