The "drive-strength" property was incorrectly spelt as "drive-strengh".
Correct this.
Signed-off-by: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
---
v1 -> v2: split from main apq8064 patch
arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
index 7c545c50847b..107fc19f1331 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
@@ -11,19 +11,19 @@ pios {
sdcc1_pins: sdcc1-pin-active {
clk {
pins = "sdc1_clk";
- drive-strengh = <16>;
+ drive-strength = <16>;
bias-disable;
};
cmd {
pins = "sdc1_cmd";
- drive-strengh = <10>;
+ drive-strength = <10>;
bias-pull-up;
};
data {
pins = "sdc1_data";
- drive-strengh = <10>;
+ drive-strength = <10>;
bias-pull-up;
};
};
@@ -31,19 +31,19 @@ data {
sdcc3_pins: sdcc3-pin-active {
clk {
pins = "sdc3_clk";
- drive-strengh = <8>;
+ drive-strength = <8>;
bias-disable;
};
cmd {
pins = "sdc3_cmd";
- drive-strengh = <8>;
+ drive-strength = <8>;
bias-pull-up;
};
data {
pins = "sdc3_data";
- drive-strengh = <8>;
+ drive-strength = <8>;
bias-pull-up;
};
};
--
2.45.2
