Trigger type is incorrectly specified as IRQ_TYPE_EDGE_BOTH
instead of IRQ_TYPE_LEVEL_HIGH. This trigger type is not
supported for SPIs and results in probe failure with -EINVAL.
Fixes: 927173bf8a0e ("arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332")
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 7a39e66d51f1..ff8ad1036ac7 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -322,8 +322,8 @@ usb: usb@8af8800 {
reg = <0x08af8800 0x400>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 53 IRQ_TYPE_EDGE_BOTH>,
- <GIC_SPI 52 IRQ_TYPE_EDGE_BOTH>;
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event",
"dp_hs_phy_irq",
"dm_hs_phy_irq";
--
2.34.1
