Re: [PATCH v2] tty: msm_serial: remove static clk rate setting in probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2016-03-07 08:16, Srinivas Kandagatla wrote:
The issue with setting up a fixed clock rate at probe is that it would
overwrite the console rate set by the bootloader for its console device. This would result in serial out corruption or missing log when we system
is booted with earlycon. This is not a issue if we boot system without
earlycon.

This setup is at least not required with the mainline driver, this code
used to be required because the clk_enable() call would fail if
clk_set_rate() wasn't called first.

Originally the issue was noticed on DB410c which is based on APQ8016
chipset.

Without this patch the console log with earlycon would look like:
...
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[    0.000000] NR_IRQS:64 nr_irqs:64 0
����+HH��0.699378] console [ttyMSM0] enabled
[    0.699378] console [ttyMSM0] enabled
[    0.702003] bootconsole [uart0] disabled
[    0.702003] bootconsole [uart0] disabled
...

with this patch I can see all the skipped lines on the console

Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---

Tested on DB410C. Fixed below curruption with earlycon:

[ 0.815843] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
����[    1.411080] console [ttyMSM0] enabled
[    1.411080] console [ttyMSM0] enabled

Tested-by: Pramod Gurav <gpramod@xxxxxxxxxxxxxx>


Changes since v1:
	- removed empty line suggested by Greg KH
	- added reviewed-by
	- added extra comment suggested by Stephen Boyd.

 drivers/tty/serial/msm_serial.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index dcde955..3bf41ab 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1579,8 +1579,6 @@ static int msm_serial_probe(struct platform_device *pdev)
 		msm_port->pclk = devm_clk_get(&pdev->dev, "iface");
 		if (IS_ERR(msm_port->pclk))
 			return PTR_ERR(msm_port->pclk);
-
-		clk_set_rate(msm_port->clk, 1843200);
 	}

 	port->uartclk = clk_get_rate(msm_port->clk);
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux