Re: [PATCH 07/13] dt-bindings: media: camss: Add qcom,sm8550-camss binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/07/2024 18:06, Depeng Shao wrote:
> Add bindings for qcom,sm8550-camss in order to support the camera
> subsystem for sm8550
> 
> Co-developed-by: Yongsheng Li <quic_yon@xxxxxxxxxxx>
> Signed-off-by: Yongsheng Li <quic_yon@xxxxxxxxxxx>
> Signed-off-by: Depeng Shao <quic_depengs@xxxxxxxxxxx>
> ---
>  .../bindings/media/qcom,sm8550-camss.yaml     | 545 ++++++++++++++++++
>  1 file changed, 545 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
> new file mode 100644
> index 000000000000..d002b0ff119e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
> @@ -0,0 +1,545 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,sm8550-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SM8550 Camera Subsystem (CAMSS)
> +
> +maintainers:
> +  - Depeng Shao <quic_depengs@xxxxxxxxxxx>
> +
> +description: |

Do not need '|' unless you need to preserve formatting.

This wasn't tested so I am not going to perform full review.

Look at "Re: [PATCH 1/6] media: dt-bindings: media: camss: Add
qcom,sc7280-camss binding" - all comments apply.

...

> +
> +required:
> +  - clock-names
> +  - clocks
> +  - compatible

Keep the same order as in "properties:'.

> +  - interconnects
> +  - interconnect-names
> +  - interrupts
> +  - interrupt-names
> +  - iommus
> +  - power-domains
> +  - reg
> +  - reg-names
> +  - vdda-phy-supply
> +  - vdda-pll-supply
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,sm8550-camcc.h>
> +    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        camss: camss@ace4000 {
> +            compatible = "qcom,sm8550-camss";
> +
> +            reg = <0 0x0ace4000 0 0x2000>,
> +                  <0 0x0ace6000 0 0x2000>,
> +                  <0 0x0ace8000 0 0x2000>,
> +                  <0 0x0acea000 0 0x2000>,
> +                  <0 0x0acec000 0 0x2000>,
> +                  <0 0x0acee000 0 0x2000>,
> +                  <0 0x0acf0000 0 0x2000>,
> +                  <0 0x0acf2000 0 0x2000>,
> +                  <0 0x0acb7000 0 0xd00>,
> +                  <0 0x0acb9000 0 0xd00>,
> +                  <0 0x0acbb000 0 0xd00>,
> +                  <0 0x0acca000 0 0xa00>,
> +                  <0 0x0acce000 0 0xa00>,
> +                  <0 0x0acb6000 0 0x1000>,
> +                  <0 0x0ac62000 0 0xf000>,
> +                  <0 0x0ac71000 0 0xf000>,
> +                  <0 0x0ac80000 0 0xf000>,
> +                  <0 0x0acca000 0 0x2800>,
> +                  <0 0x0acce000 0 0x2800>;
> +            reg-names = "csiphy0",
> +                    "csiphy1",
> +                    "csiphy2",
> +                    "csiphy3",

These (and many others further) looks misaligned.

Best regards,
Krzysztof





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux