Convert the Qualcomm APQ8084 TLMM block bindings from text to yaml dt
schema format.
Signed-off-by: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
---
.../bindings/pinctrl/qcom,apq8084-pinctrl.txt | 188 ------------------
.../pinctrl/qcom,apq8084-pinctrl.yaml | 129 ++++++++++++
2 files changed, 129 insertions(+), 188 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
deleted file mode 100644
index c9782397ff14..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
+++ /dev/null
@@ -1,188 +0,0 @@
-Qualcomm APQ8084 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-MSM8960 platform.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be "qcom,apq8084-pinctrl"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: the base address and size of the TLMM register space.
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
- Usage: required
- Value type: <none>
- Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 2. Specifying the pin number and flags, as defined
- in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
- Usage: required
- Value type: <none>
- Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 2. Specifying the pin number and flags, as defined
- in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
- Usage: required
- Definition: see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
- Usage: optional
- Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
- Usage: required
- Value type: <string-array>
- Definition: List of gpio pins affected by the properties specified in
- this subnode. Valid pins are:
- gpio0-gpio146,
- sdc1_clk,
- sdc1_cmd,
- sdc1_data
- sdc2_clk,
- sdc2_cmd,
- sdc2_data
-
-- function:
- Usage: required
- Value type: <string>
- Definition: Specify the alternative function to be configured for the
- specified pins. Functions are only valid for gpio pins.
- Valid values are:
- adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3,
- blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
- blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
- blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5,
- blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
- blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3,
- blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7, blsp_uart8,
- blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
- blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
- blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
- blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
- cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1,
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
- edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt, gcc_vtt,i
- gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio,
- hdmi_cec, hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic,
- ldo_en, ldo_update, mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst,
- pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s,
- qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n,
- sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus,
- spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s, tsif1,
- tsif2, uim, uim_batt_alarm
-
-- bias-disable:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configured as pull up.
-
-- output-high:
- Usage: optional
- Value type: <none>
- Definition: The specified pins are configured in output mode, driven
- high.
- Not valid for sdc pins.
-
-- output-low:
- Usage: optional
- Value type: <none>
- Definition: The specified pins are configured in output mode, driven
- low.
- Not valid for sdc pins.
-
-- drive-strength:
- Usage: optional
- Value type: <u32>
- Definition: Selects the drive strength for the specified pins, in mA.
- Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
- tlmm: pinctrl@fd510000 {
- compatible = "qcom,apq8084-pinctrl";
- reg = <0xfd510000 0x4000>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 0 147>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <0 208 0>;
-
- uart2: uart2-default {
- mux {
- pins = "gpio4", "gpio5";
- function = "blsp_uart2";
- };
-
- tx {
- pins = "gpio4";
- drive-strength = <4>;
- bias-disable;
- };
-
- rx {
- pins = "gpio5";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.yaml
new file mode 100644
index 000000000000..38877d8b97ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,apq8084-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. APQ8084 TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
+
+description: |
+ Top Level Mode Multiplexer pin controller in Qualcomm APQ8084 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,apq8084-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-reserved-ranges: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-apq8084-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-apq8084-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-apq8084-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-6])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+ sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+ blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
+ blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
+ blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3,
+ blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
+ blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6,
+ blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
+ blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3,
+ blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2,
+ blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6,
+ blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10,
+ blsp_uart11, blsp_uart12, blsp_uim1, blsp_uim2,
+ blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7,
+ blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11,
+ blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
+ cci_async, cci_async_in0, cci_i2c0, cci_i2c1,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+ cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3,
+ gcc_obt, gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2,
+ gp0_clk, gp1_clk, gpio, hdmi_cec, hdmi_ddc, hdmi_dtest,
+ hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update,
+ mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst, pci_e1,
+ pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s,
+ qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n,
+ sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus,
+ spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s,
+ tsif1, tsif2, uim, uim_batt_alarm ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,apq8084-pinctrl";
+ reg = <0xfd510000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 147>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ uart-state {
+ rx-pins {
+ pins = "gpio5";
+ function = "blsp_uart2";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio4";
+ function = "blsp_uart2";
+ bias-disable;
+ };
+ };
+ };
--
2.45.2
