Re: [PATCH 1/2 v2] device-tree: nexus7-flo: Remove power gpio key entry and use pmic8xxx-pwrkey

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 15, 2016 at 11:59 AM, Stephen Boyd <sboyd@xxxxxxxxxxxxxx> wrote:
> From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> Subject: [PATCH] Input: pmic8xxx-pwrkey: Fix algorithm for converting trigger
>  delay
>
> The trigger delay algorithm that converts from microseconds to
> the register value looks incorrect. According to most of the PMIC
> documentation, the equation is
>
>         delay (Seconds) = (1 / 1024) * 2 ^ (x + 4)
>
> except for one case where the documentation looks to have a
> formatting issue and the equation looks like
>
>         delay (Seconds) = (1 / 1024) * 2 x + 4
>
> Most likely this driver was written with the improper
> documentation to begin with. According to the downstream sources
> the valid delays are from 2 seconds to 1/64 second, and the
> latter equation just doesn't make sense for that. Let's fix the
> algorithm and the range check to match the documentation and the
> downstream sources.
>
> Reported-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: John Stultz <john.stultz@xxxxxxxxxx>
> Fixes: 92d57a73e410 ("input: Add support for Qualcomm PMIC8XXX power key")
> Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>

This works great for me, and lets me zap the pwrkey node in my dts.

Tested-by: John Stultz <john.stultz@xxxxxxxxxx>

I'll also send an updated variant of my patch that only removes the gpio key.

thanks!
-john
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux