On Sat, Jun 29, 2024 at 12:02:37AM GMT, Vikram Sharma wrote:
> Add support for IMX577 camera sensor for SC7280 SoC.
Note, the subject and commit description do not match patch contents.
>
> Signed-off-by: Hariram Purushothaman <quic_hariramp@xxxxxxxxxxx>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@xxxxxxxxxxx>
> Signed-off-by: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 9ac251fec262..1c99ee09a11a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -5167,6 +5167,39 @@ cci3_sleep: cci3-sleep-state {
> bias-pull-down;
> };
>
> + cam2_default: cam2-default {
> + rst {
> + pins = "gpio78"; /*cam3*/
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + mclk {
> + pins = "gpio67"; /*cam3*/
> + function = "cam_mclk";
> + drive-strength = <2>; /*RB5 was 16 and i changed to 2 here*/
> + bias-disable;
> + };
> + };
> +
> + cam2_suspend: cam2-suspend {
> + rst {
> + pins = "gpio78"; /*cam3*/
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-down;
> + output-low;
> + };
> +
> + mclk {
> + pins = "gpio67"; /*cam3*/
> + function = "cam_mclk";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> + };
> +
> dp_hot_plug_det: dp-hot-plug-det-state {
> pins = "gpio47";
> function = "dp_hot";
>
> --
> 2.25.1
>
--
With best wishes
Dmitry
