Re: [PATCH v3 0/2] ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 30 Jun 2024 13:29:13 +0000, Raymond Hackley wrote:
> Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the
> other Samsung devices based on MSM8226 with only a few minor differences.
> 
> The device trees contain initial support with:
>  - GPIO keys
>  - Regulator haptic
>  - SDHCI (internal and external storage)
>  - UART (on USB connector via the TI TSU6721 MUIC)
>  - Regulators
>  - Touchscreen
>  - Accelerometer
> 
> ---
> v2: Adjust l3, l15, l22 and l27 regulator voltages. Sort nodes.
>     Set regulator-allow-set-load for vqmmc supplies.
> v3: Rename node haptic to vibrator.
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y qcom/qcom-msm8226-samsung-ms013g.dtb' for 20240630132859.2885-1-raymondhackley@xxxxxxxxxxxxxx:

arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dtb: syscon@f9011000: compatible: ['syscon'] is too short
	from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml#









[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux