Re: [PATCH v13 6/6] iommu/arm-smmu: add support for PRR bit setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 6/28/2024 9:14 PM, Rob Clark wrote:
On Fri, Jun 28, 2024 at 8:10 AM Bibek Kumar Patro
<quic_bibekkum@xxxxxxxxxxx> wrote:



On 6/28/2024 7:47 PM, Rob Clark wrote:
On Fri, Jun 28, 2024 at 7:05 AM Bibek Kumar Patro
<quic_bibekkum@xxxxxxxxxxx> wrote:

Add an adreno-smmu-priv interface for drm/msm to call
into arm-smmu-qcom and initiate the PRR bit setup or reset
sequence as per request.

This will be used by GPU to setup the PRR bit and related
configuration registers through adreno-smmu private
interface instead of directly poking the smmu hardware.

Suggested-by: Rob Clark <robdclark@xxxxxxxxx>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
---
   drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 23 ++++++++++++++++++++++
   drivers/iommu/arm/arm-smmu/arm-smmu.h      |  2 ++
   include/linux/adreno-smmu-priv.h           |  6 +++++-
   3 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index bd101a161d04..64571a1c47b8 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -28,6 +28,7 @@
   #define PREFETCH_SHALLOW       (1 << PREFETCH_SHIFT)
   #define PREFETCH_MODERATE      (2 << PREFETCH_SHIFT)
   #define PREFETCH_DEEP          (3 << PREFETCH_SHIFT)
+#define GFX_ACTLR_PRR          (1 << 5)

   static const struct actlr_config sc7280_apps_actlr_cfg[] = {
          { 0x0800, 0x04e0, PREFETCH_DEFAULT | CMTLB },
@@ -235,6 +236,27 @@ static void qcom_adreno_smmu_resume_translation(const void *cookie, bool termina
          arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_RESUME, reg);
   }

+static void qcom_adreno_smmu_set_prr(const void *cookie, phys_addr_t page_addr, bool set)
+{
+       struct arm_smmu_domain *smmu_domain = (void *)cookie;
+       struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
+       struct arm_smmu_device *smmu = smmu_domain->smmu;
+       u32 reg = 0;
+
+       writel_relaxed(lower_32_bits(page_addr),
+                               smmu->base + ARM_SMMU_GFX_PRR_CFG_LADDR);
+
+       writel_relaxed(upper_32_bits(page_addr),
+                               smmu->base + ARM_SMMU_GFX_PRR_CFG_UADDR);
+
+       reg =  arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR);
+       reg &= ~GFX_ACTLR_PRR;
+       if (set)
+               reg |= FIELD_PREP(GFX_ACTLR_PRR, 1);
+       arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR, reg);
+

nit, extra line


Ack, will remove this. Thanks for pointing out.

Also, if you passed a `struct page *` instead, then you could drop the
bool param, ie. passing NULL for the page would disable PRR.  But I
can go either way if others have a strong preference for phys_addr_t.


Oh okay, this looks simple to reset the prr bit.
But since this page is allocated and is used inside gfx driver
before being utilized for prr bit operation, would it be safe for
drm/gfx driver to keep a reference to this page in smmu driver?

Since we only need the page address for configuring the
CFG_UADDR/CFG_LADDR registers so passed the phys_addr_t.

I don't think the smmu driver needs to keep a reference to the page..
we can just say it is the responsibility of the drm driver to call
set_prr(NULL) before freeing the page


That makes sense. If we go by this NULL page method to disable the PRR, we would have to set the address registers to reset value as well.

The sequence would be like the following as per my understaning:
- Check if it's NULL page
- Set the PRR_CFG_UADDR/PRR_CFG_LADDR to reset values i.e - 0x0 for
  these registers
- Reset the PRR bit in actlr register

Similar to this snippet:

#PRR_RESET_ADDR 0x0

--------------
reg =  arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR);
reg &= ~GFX_ACTLR_PRR;
arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR, reg);

if (!prr_page) {
	writel_relaxed(PRR_RESET_ADDR,
			smmu->base + ARM_SMMU_GFX_PRR_CFG_LADDR);
	writel_relaxed(PRR_RESET_ADDR),
                        smmu->base + ARM_SMMU_GFX_PRR_CFG_UADDR);
	return;
}


writel_relaxed(lower_32_bits(page_to_phys(prr_page)),
 		smmu->base + ARM_SMMU_GFX_PRR_CFG_LADDR);

writel_relaxed(upper_32_bits(page_to_phys(prr_page)),
 		smmu->base + ARM_SMMU_GFX_PRR_CFG_UADDR);

reg |= FIELD_PREP(GFX_ACTLR_PRR, 1);
arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR, reg);
-----------------

If looks good, will implement the same in next version.

Thanks & regards,
Bibek

BR,
-R

Otherwise, lgtm

BR,
-R


Thanks & regards,
Bibek

+}
+
   #define QCOM_ADRENO_SMMU_GPU_SID 0

   static bool qcom_adreno_smmu_is_gpu_device(struct device *dev)
@@ -407,6 +429,7 @@ static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
          priv->get_fault_info = qcom_adreno_smmu_get_fault_info;
          priv->set_stall = qcom_adreno_smmu_set_stall;
          priv->resume_translation = qcom_adreno_smmu_resume_translation;
+       priv->set_prr = qcom_adreno_smmu_set_prr;

          actlrvar = qsmmu->data->actlrvar;
          if (!actlrvar)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
index d9c2ef8c1653..3076bef49e20 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
@@ -154,6 +154,8 @@ enum arm_smmu_cbar_type {
   #define ARM_SMMU_SCTLR_M               BIT(0)

   #define ARM_SMMU_CB_ACTLR              0x4
+#define ARM_SMMU_GFX_PRR_CFG_LADDR     0x6008
+#define ARM_SMMU_GFX_PRR_CFG_UADDR     0x600C

   #define ARM_SMMU_CB_RESUME             0x8
   #define ARM_SMMU_RESUME_TERMINATE      BIT(0)
diff --git a/include/linux/adreno-smmu-priv.h b/include/linux/adreno-smmu-priv.h
index c637e0997f6d..d6e2ca9f8d8c 100644
--- a/include/linux/adreno-smmu-priv.h
+++ b/include/linux/adreno-smmu-priv.h
@@ -49,7 +49,10 @@ struct adreno_smmu_fault_info {
    *                 before set_ttbr0_cfg().  If stalling on fault is enabled,
    *                 the GPU driver must call resume_translation()
    * @resume_translation: Resume translation after a fault
- *
+ * @set_prr:      Extendible interface to be used by GPU to modify the
+ *                 ACTLR register bits, currently used to configure
+ *                 Partially-Resident-Region (PRR) feature's
+ *                 setup and reset sequence as requested.
    *
    * The GPU driver (drm/msm) and adreno-smmu work together for controlling
    * the GPU's SMMU instance.  This is by necessity, as the GPU is directly
@@ -67,6 +70,7 @@ struct adreno_smmu_priv {
       void (*get_fault_info)(const void *cookie, struct adreno_smmu_fault_info *info);
       void (*set_stall)(const void *cookie, bool enabled);
       void (*resume_translation)(const void *cookie, bool terminate);
+    void (*set_prr)(const void *cookie, phys_addr_t page_addr, bool set);
   };

   #endif /* __ADRENO_SMMU_PRIV_H */
--
2.34.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux