On 24-06-30 16:59:27, Xilin Wu via B4 Relay wrote:
> From: Xilin Wu <wuxilin123@xxxxxxxxx>
>
> ASUS Vivobook S 15 is a laptop based on the Qualcomm Snapdragon X Elite
> SoC (X1E78100).
>
> Add the device tree for the laptop with support for the following features:
>
> - CPU frequency scaling up to 3.4GHz
> - NVMe storage on PCIe 6a (capable of Gen4x4, currently limited to Gen4x2)
> - Keyboard and touchpad
> - WCN7850 Wi-Fi
> - Two Type-C ports on the left side (USB3 only in one orientation)
> - internal eDP display
> - ADSP and CDSP remoteprocs
>
> Further details could be found in the cover letter.
>
> Signed-off-by: Xilin Wu <wuxilin123@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 616 +++++++++++++++++++++
> 2 files changed, 617 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 5576c7d6ea06..fe08b6be565d 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -258,5 +258,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk-display-card.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb
> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb
> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
> new file mode 100644
> index 000000000000..34f90e45a5d7
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
> @@ -0,0 +1,616 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2024, Xilin Wu <wuxilin123@xxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +
> +#include "x1e80100.dtsi"
> +#include "x1e80100-pmics.dtsi"
> +
> +/ {
> + model = "ASUS Vivobook S 15";
> + compatible = "asus,vivobook-s15", "qcom,x1e80100";
> + chassis-type = "laptop";
> +
[ ... ]
> +
> + tpad_default: tpad-default-state {
> + pins = "gpio3";
> + function = "gpio";
> + bias-disable;
> + };
> +};
> +
> +&usb_1_ss0_hsphy {
> + vdd-supply = <&vreg_l2e_0p8>;
I think you will probably want to use vreg_l3j_0p8 here. See following
fix for CRD and QCP:
https://lore.kernel.org/linux-kernel/20240629-x1e80100-dts-fix-hsphy-0-8v-supplies-v1-1-de99ee030b27@xxxxxxxxxx/T/
> + vdda12-supply = <&vreg_l2j_1p2>;
> +
> + phys = <&smb2360_0_eusb2_repeater>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_ss0_qmpphy {
> + vdda-phy-supply = <&vreg_l3e_1p2>;
> + vdda-pll-supply = <&vreg_l1j_0p8>;
> +
> + orientation-switch;
> +
> + status = "okay";
> +};
> +
> +&usb_1_ss0 {
> + status = "okay";
> +};
> +
> +&usb_1_ss0_dwc3 {
> + dr_mode = "host";
> +};
> +
> +&usb_1_ss0_dwc3_hs {
> + remote-endpoint = <&pmic_glink_ss0_hs_in>;
> +};
> +
> +&usb_1_ss0_qmpphy_out {
> + remote-endpoint = <&pmic_glink_ss0_ss_in>;
> +};
> +
> +&usb_1_ss1_hsphy {
> + vdd-supply = <&vreg_l2e_0p8>;
Same here.
> + vdda12-supply = <&vreg_l2j_1p2>;
> +
> + phys = <&smb2360_1_eusb2_repeater>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_ss1_qmpphy {
> + vdda-phy-supply = <&vreg_l3e_1p2>;
> + vdda-pll-supply = <&vreg_l2d_0p9>;
> +
> + orientation-switch;
> +
> + status = "okay";
> +};
> +
> +&usb_1_ss1 {
> + status = "okay";
> +};
> +
> +&usb_1_ss1_dwc3 {
> + dr_mode = "host";
> +};
> +
> +&usb_1_ss1_dwc3_hs {
> + remote-endpoint = <&pmic_glink_ss1_hs_in>;
> +};
> +
> +&usb_1_ss1_qmpphy_out {
> + remote-endpoint = <&pmic_glink_ss1_ss_in>;
> +};
>
> --
> 2.45.2
>
>
