Re: [PATCH v2 2/2] ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29.06.2024 11:01 AM, Luca Weiss wrote:
> On Donnerstag, 27. Juni 2024 21:30:52 MESZ Raymond Hackley wrote:
>> Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the
>> other Samsung devices based on MSM8226 with only a few minor differences.
>>
>> The device trees contain initial support with:
>>  - GPIO keys
>>  - Regulator haptic
>>  - SDHCI (internal and external storage)
>>  - UART (on USB connector via the TI TSU6721 MUIC)
>>  - Regulators
>>  - Touchscreen
>>  - Accelerometer
>>
>> Signed-off-by: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
>> ---

[...]

>> +	haptic {
>> +		compatible = "regulator-haptic";
>> +		haptic-supply = <&reg_motor_vdd>;
>> +		min-microvolt = <3300000>;
>> +		max-microvolt = <3300000>;
>> +	};
> 
> This is the vibration motor? Use "vibrator" as node name then as per
> https://github.com/devicetree-org/devicetree-specification/blob/main/source/chapter2-devicetree-basics.rst?plain=1#L299

With that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux