Re: [PATCH 2/2] arm64: dts: qcom: Add device tree for ASUS Vivobook S 15

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28.06.2024 1:30 PM, Xilin Wu via B4 Relay wrote:
> From: Xilin Wu <wuxilin123@xxxxxxxxx>
> 
> ASUS Vivobook S 15 is a laptop based on the Qualcomm Snapdragon X Elite
> SoC (X1E78100).
> 
> Add the device tree for the laptop with support for the following features:
> 
> - CPU frequency scaling up to 3.4GHz
> - NVMe storage on PCIe 6a (capable of Gen4x4, currently limited to Gen4x2)
> - Keyboard and touchpad
> - WCN7850 Wi-Fi
> - Two Type-C ports on the left side (USB3 only in one orientation)
> - internal eDP display
> - ADSP and CDSP remoteprocs
> 
> Further details could be found in the cover letter.
> 
> Signed-off-by: Xilin Wu <wuxilin123@xxxxxxxxx>
> ---

[...]

> +	pmic-glink {
> +		compatible = "qcom,x1e80100-pmic-glink",
> +			     "qcom,sm8550-pmic-glink",
> +			     "qcom,pmic-glink";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
> +				    <&tlmm 123 GPIO_ACTIVE_HIGH>;

#address-/size-cells usually go at the end

> +
> +		connector@0 {

Could you add a comment detailing which port is which (like in x1e80100-crd.dts)?

> +		pinctrl-names = "default";
> +		pinctrl-0 = <&nvme_reg_en>;

property-n
property-names

[...]

> +
> +	ports {
> +		port@1 {
> +			reg = <1>;

Please separate properties with subnodes with a newline

[...]

> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie6a_default>;

property-n
property-names

Looks good otherwise!

Konrad




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux