On 6/27/2024 12:16 AM, Rob Clark wrote:
On Thu, Jun 13, 2024 at 1:11 AM Bibek Kumar Patro
<quic_bibekkum@xxxxxxxxxxx> wrote:
On 6/12/2024 12:32 AM, Rob Clark wrote:
On Wed, Jun 5, 2024 at 5:18 AM Bibek Kumar Patro
<quic_bibekkum@xxxxxxxxxxx> wrote:
Add an adreno-smmu-priv interface for drm/msm to call
into arm-smmu-qcom and initiate the PRR bit setup or reset
sequence as per request.
This will be used by GPU side to setup the PRR bit and
related configuration registers through adreno-smmu private
interface instead of directly poking the smmu hardware.
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
---
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 21 +++++++++++++++++++++
drivers/iommu/arm/arm-smmu/arm-smmu.h | 2 ++
include/linux/adreno-smmu-priv.h | 5 ++++-
3 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 8dabc26fa10e..2f4ee22f740a 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -28,6 +28,7 @@
#define PREFETCH_SHALLOW (1 << PREFETCH_SHIFT)
#define PREFETCH_MODERATE (2 << PREFETCH_SHIFT)
#define PREFETCH_DEEP (3 << PREFETCH_SHIFT)
+#define GFX_ACTLR_PRR (1 << 5)
static const struct actlr_config sc7280_apps_actlr_cfg[] = {
{ 0x0800, 0x24e1, PREFETCH_DEFAULT | CMTLB },
@@ -212,6 +213,25 @@ static void qcom_adreno_smmu_resume_translation(const void *cookie, bool termina
arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_RESUME, reg);
}
+static void qcom_adreno_smmu_set_actlr_bit(const void *cookie, phys_addr_t page_addr, bool set)
+{
_set_actlr_bit() is a bit more of an implementation detail. Maybe
_set_prr() would be a better name?
Yes set_prr sounds more explanatory. Infact Initially planned to name it
as set_actlr_prr() but later changed it to set_actlr_bit() so to keep
this interface extendible.
Incase if gfx driver in future wants to control some other ACTLR bit as
well along with PRR bit, then we can extend this same interface to
handle other bits.
So any additional adreno-smmu-priv interface would note be needed, and
set_actlr_bit can itself be used for gfx handling of all required ACTLR
bits.
I think we can name it set_actlr_prr() for now, and later can change the
name incase we extend it. What's your thought on this?
I think set_prr() or set_acltr_prr() is fine.. we can worry about
making it more generic if and when there are other ACLTR bits the gpu
wants to control
Ack, sounds good to me as well. I've used set_prr() for now.
Also, the version of this patch that I typed up (but haven't sent to
list yet) took a `struct page *` instead of a phys_addr_t.. passing
NULL would disable PRR, so I didn't need the third arg
+ struct arm_smmu_domain *smmu_domain = (void *)cookie;
+ struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ u32 reg = 0;
+
+ writel_relaxed(lower_32_bits(page_addr),
+ (void *)smmu->ioaddr + ARM_SMMU_GFX_PRR_CFG_LADDR);
+
+ writel_relaxed(upper_32_bits(page_addr),
+ (void *)smmu->ioaddr + ARM_SMMU_GFX_PRR_CFG_UADDR);
I know downstream writes it as upper+lower, but I'd guess we could
just writeq, couldn't we?
Actually ARM_SMMU_GFX_PRR_CFG_LADDR, ARM_SMMU_GFX_PRR_CFG_UADDR both are
separate 32 bit registers. So I think writeq for 64bit write might not
work, as these are not 64 bit registers nor these two are separated by
64 aligned address.
ahh, ok
+
+ reg = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR);
+ reg |= FIELD_PREP(GFX_ACTLR_PRR, set ? 1 : 0);
this won't clear the ENABLE_PRR bit if we try to disable it after
enabling (unless this bit is read-as-zero
Ah okay right, got it. Thanks for pointing this out.
Will take care of this in next version.
will use set/reset in side if() instead with different
bitwise ops for set and reset.
Also, can we give a name to PRR? I'm guessing it is something like
physical-range-remap?
Yes sure. I checked on this, PRR here actually stands for
partially-resident-region.
ahh, ok, that makes sense
So would be better If we add expansion for PRR in a comment ?
Because if we expand PRR in variables/defines then wouldn't
the names become too long?
Yeah, I was just thinking to mention it in the comment for set_prr()
Yes, that seemed to be an appropriate place to add the expansion.
Mentioned it in the comment for now.
Thanks & regards,
Bibek
BR,
-R
Thanks & regards,
Bibek
BR,
-R
+ arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR, reg);
+
+}
+
#define QCOM_ADRENO_SMMU_GPU_SID 0
static bool qcom_adreno_smmu_is_gpu_device(struct device *dev)
@@ -384,6 +404,7 @@ static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
priv->get_fault_info = qcom_adreno_smmu_get_fault_info;
priv->set_stall = qcom_adreno_smmu_set_stall;
priv->resume_translation = qcom_adreno_smmu_resume_translation;
+ priv->set_actlr_bit = qcom_adreno_smmu_set_actlr_bit;
actlrvar = qsmmu->data->actlrvar;
if (!actlrvar)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
index d9c2ef8c1653..3076bef49e20 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
@@ -154,6 +154,8 @@ enum arm_smmu_cbar_type {
#define ARM_SMMU_SCTLR_M BIT(0)
#define ARM_SMMU_CB_ACTLR 0x4
+#define ARM_SMMU_GFX_PRR_CFG_LADDR 0x6008
+#define ARM_SMMU_GFX_PRR_CFG_UADDR 0x600C
#define ARM_SMMU_CB_RESUME 0x8
#define ARM_SMMU_RESUME_TERMINATE BIT(0)
diff --git a/include/linux/adreno-smmu-priv.h b/include/linux/adreno-smmu-priv.h
index c637e0997f6d..448e191eeb52 100644
--- a/include/linux/adreno-smmu-priv.h
+++ b/include/linux/adreno-smmu-priv.h
@@ -49,7 +49,9 @@ struct adreno_smmu_fault_info {
* before set_ttbr0_cfg(). If stalling on fault is enabled,
* the GPU driver must call resume_translation()
* @resume_translation: Resume translation after a fault
- *
+ * @set_actlr_bits: Extendible interface to be used by GPU to modify the
+ * ACTLR bits, currently used to intitate PRR bit setup or
+ * reset sequence for ACTLR registers as requested.
*
* The GPU driver (drm/msm) and adreno-smmu work together for controlling
* the GPU's SMMU instance. This is by necessity, as the GPU is directly
@@ -67,6 +69,7 @@ struct adreno_smmu_priv {
void (*get_fault_info)(const void *cookie, struct adreno_smmu_fault_info *info);
void (*set_stall)(const void *cookie, bool enabled);
void (*resume_translation)(const void *cookie, bool terminate);
+ void (*set_actlr_bit)(const void *cookie, phys_addr_t page_addr, bool set);
};
#endif /* __ADRENO_SMMU_PRIV_H */
--
2.34.1
