Re: [PATCH v2 2/2] interconnect: qcom: Add MSM8953 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27.06.24 18:08, Barnabás Czémán wrote:
From: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>

Add driver for interconnect busses found in MSM8953 based platforms.
The topology consists of four NoCs that are partially controlled by a
RPM processor.

Note that one of NoCs (System NoC) has a counterpart (System NoC MM)
that is modelled as child device to avoid resource conflicts, since it
uses same MMIO space for configuration.

Signed-off-by: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>
Signed-off-by: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
---
  drivers/interconnect/qcom/Kconfig   |    9 +
  drivers/interconnect/qcom/Makefile  |    2 +
  drivers/interconnect/qcom/msm8953.c | 1325 +++++++++++++++++++++++++++++++++++
  3 files changed, 1336 insertions(+)

[..]
+
+static struct qcom_icc_node * const msm8953_pcnoc_nodes[] = {
+	[MAS_SPDM] = &mas_spdm,
+	[MAS_BLSP_1] = &mas_blsp_1,
+	[MAS_BLSP_2] = &mas_blsp_2,
+	[MAS_USB3] = &mas_usb3,
+	[MAS_CRYPTO] = &mas_crypto,
+	[MAS_SDCC_1] = &mas_sdcc_1,
+	[MAS_SDCC_2] = &mas_sdcc_2,
+	[MAS_SNOC_PCNOC] = &mas_snoc_pcnoc,
+	[PCNOC_M_0] = &pcnoc_m_0,
+	[PCNOC_M_1] = &pcnoc_m_1,
+	[PCNOC_INT_1] = &pcnoc_int_1,
+	[PCNOC_INT_2] = &pcnoc_int_2,
+	[PCNOC_S_0] = &pcnoc_s_0,
+	[PCNOC_S_1] = &pcnoc_s_1,
+	[PCNOC_S_2] = &pcnoc_s_2,
+	[PCNOC_S_3] = &pcnoc_s_3,
+	[PCNOC_S_4] = &pcnoc_s_4,
+	[PCNOC_S_6] = &pcnoc_s_6,
+	[PCNOC_S_7] = &pcnoc_s_7,
+	[PCNOC_S_8] = &pcnoc_s_8,
+	[PCNOC_S_9] = &pcnoc_s_9,
+	[SLV_SPDM] = &slv_spdm,
+	[SLV_PDM] = &slv_pdm,
+	[SLV_TCSR] = &slv_tcsr,
+	[SLV_SNOC_CFG] = &slv_snoc_cfg,
+	[SLV_TLMM] = &slv_tlmm,
+	[SLV_MESSAGE_RAM] = &slv_message_ram,
+	[SLV_BLSP_1] = &slv_blsp_1,
+	[SLV_BLSP_2] = &slv_blsp_2,
+	[SLV_PRNG] = &slv_prng,
+	[SLV_CAMERA_SS_CFG] = &slv_camera_ss_cfg,
+	[SLV_DISP_SS_CFG] = &slv_disp_ss_cfg,
+	[SLV_VENUS_CFG] = &slv_venus_cfg,
+	[SLV_GPU_CFG] = &slv_gpu_cfg,
+	[SLV_SDCC_1] = &slv_sdcc_1,
+	[SLV_SDCC_2] = &slv_sdcc_2,
+	[SLV_CRYPTO_0_CFG] = &slv_crypto_0_cfg,
+	[SLV_PMIC_ARB] = &slv_pmic_arb,
+	[SLV_USB3] = &slv_usb3,
+	[SLV_IPA_CFG] = &slv_ipa_cfg,
+	[SLV_TCU] = &slv_tcu,
+	[SLV_PCNOC_SNOC] = &slv_pcnoc_snoc,
+};
+
+static const char * const msm8953_pcnoc_bus_clocks[] = {
+	"bus", "bus_a"
+};

This seems to be unused?

BR,
Georgi

+
+static const char * const msm8953_pcnoc_intf_clocks[] = {
+	"pcnoc_usb3_axi"
+};
+
+static const struct regmap_config msm8953_pcnoc_regmap_config = {
+	.fast_io = true,
+	.max_register = 0x12080,
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+};
+
+static const struct qcom_icc_desc msm8953_pcnoc = {
+	.type = QCOM_ICC_NOC,
+	.bus_clk_desc = &bus_0_clk,
+	.intf_clocks = msm8953_pcnoc_intf_clocks,
+	.num_intf_clocks = ARRAY_SIZE(msm8953_pcnoc_intf_clocks),
+	.nodes = msm8953_pcnoc_nodes,
+	.num_nodes = ARRAY_SIZE(msm8953_pcnoc_nodes),
+	.qos_offset = 0x7000,
+	.regmap_cfg = &msm8953_pcnoc_regmap_config,
+};





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux