Re: [PATCH] pinctrl: qcom: lpass-lpi: increase MAX_NR_GPIO to 32

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 27, 2024 at 01:36:54AM GMT, Alexey Klimov wrote:
> Account for more than only 23 GPIOs in LPASS Low Power Island pinctrl
> generic driver. The previous value 23 was chosen to satisfy existing
> SoC-specific drivers. However SM4250 LPI pinctrl uses more than 23 GPIOs
> and its probe routine fails on:
> 
>         if (WARN_ON(data->npins > MAX_NR_GPIO))
>                 return -EINVAL;
> 
> with the following message:
> 
> [   10.709014] ------------[ cut here ]------------
> [   10.719085] WARNING: CPU: 1 PID: 56 at
> drivers/pinctrl/qcom/pinctrl-lpass-lpi.c:446
> lpi_pinctrl_probe+0x308/0x388 [pinctrl_lpass_lpi]
> [   10.719108] Modules linked in: [...]
> [   10.719238] CPU: 1 PID: 56 Comm: kworker/u33:0 Not tainted
> 6.10.0-rc2-00012-ge45ddb1f8d34-dirty #7
> [   10.719245] Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT)
> [   10.719250] Workqueue: events_unbound deferred_probe_work_func
> [   10.719265] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [   10.719271] pc : lpi_pinctrl_probe+0x308/0x388 [pinctrl_lpass_lpi]
> [   10.719278] lr : lpi_pinctrl_probe+0x44/0x388 [pinctrl_lpass_lpi]
>         ...
> [   10.719357] Call trace:
> [   10.719361]  lpi_pinctrl_probe+0x308/0x388 [pinctrl_lpass_lpi]
> [   10.719369]  platform_probe+0x68/0xc4
> [   10.719378]  really_probe+0xbc/0x29c
> [   10.719384]  __driver_probe_device+0x78/0x12c
> [   10.719390]  driver_probe_device+0xd8/0x15c
> [   10.719395]  __device_attach_driver+0xb8/0x134
> [   10.719401]  bus_for_each_drv+0x88/0xe8
> [   10.719407]  __device_attach+0xa0/0x190
> [   10.719412]  device_initial_probe+0x14/0x20
> [   10.719418]  bus_probe_device+0xac/0xb0
> [   10.719423]  deferred_probe_work_func+0x88/0xc0
> [   10.719429]  process_one_work+0x150/0x294
> [   10.719439]  worker_thread+0x2f8/0x408
> [   10.719445]  kthread+0x110/0x114
> [   10.719452]  ret_from_fork+0x10/0x20
> [   10.719459] ---[ end trace 0000000000000000 ]---
> [   10.719589] qcom-sm4250-lpass-lpi-pinctrl a7c0000.pinctrl: probe

Nit: usually you can ommit timestamps when posting the backtrace.

> with driver qcom-sm4250-lpass-lpi-pinctrl failed with error -22
> 
> Fixes: c2e5a25e8d88 ("pinctrl: qcom: Introduce SM4250 LPI pinctrl driver")
> Signed-off-by: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
> ---
>  drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux