Re: [PATCH v2 2/5] dmaengine: qcom: bam_dma: clear BAM interrupt only if it is rised

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2016-04-06 04:26, Stanimir Varbanov wrote:
Currently we write BAM_IRQ_CLR register with zero even when no
BAM_IRQ occured. This write has some bad side effects when the
BAM instance is for the crypto engine. In case of crypto engine
some of the BAM registers are xPU protected and they cannot be
controlled by the driver.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
Reviewed-by: Andy Gross <andy.gross@xxxxxxxxxx>
---
 drivers/dma/qcom/bam_dma.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)


Tested-by: Pramod Gurav <gpramod@xxxxxxxxxxxxxx>

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index a486bc0f82e0..789d5f836bf7 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -801,13 +801,17 @@ static irqreturn_t bam_dma_irq(int irq, void *data)
 	if (srcs & P_IRQ)
 		tasklet_schedule(&bdev->task);

-	if (srcs & BAM_IRQ)
+	if (srcs & BAM_IRQ) {
 		clr_mask = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_STTS));

- /* don't allow reorder of the various accesses to the BAM registers */
-	mb();
+		/*
+		 * don't allow reorder of the various accesses to the BAM
+		 * registers
+		 */
+		mb();

-	writel_relaxed(clr_mask, bam_addr(bdev, 0, BAM_IRQ_CLR));
+		writel_relaxed(clr_mask, bam_addr(bdev, 0, BAM_IRQ_CLR));
+	}

 	return IRQ_HANDLED;
 }
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux