From: Chris Lew <quic_clew@xxxxxxxxxxx>
When using /proc/interrupts to collect statistics on smp2p interrupt
counts, it is hard to distinguish the different instances of smp2p from
each other. For example to debug a processor boot issue, the ready and
handover interrupts are checked for sanity to ensure the firmware
reached a specific initialization stage.
Remove "smp2p" string from the irq request so that the irq will default
to the device name. Add an .irq_print_chip() callback to print the irq
chip name as the device name. These two changes allow for a unique name
to be used in /proc/interrupts as shown below.
/ # cat /proc/interrupts | grep smp2p
18: ... ipcc 196610 Edge smp2p-adsp
20: ... ipcc 131074 Edge smp2p-modem
170: ... smp2p-modem 1 Edge q6v5 ready
178: ... smp2p-adsp 1 Edge q6v5 ready
Signed-off-by: Chris Lew <quic_clew@xxxxxxxxxxx>
---
drivers/soc/qcom/smp2p.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/smp2p.c b/drivers/soc/qcom/smp2p.c
index a21241cbeec7..696c2a8387d0 100644
--- a/drivers/soc/qcom/smp2p.c
+++ b/drivers/soc/qcom/smp2p.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/pm_wakeirq.h>
#include <linux/regmap.h>
+#include <linux/seq_file.h>
#include <linux/soc/qcom/smem.h>
#include <linux/soc/qcom/smem_state.h>
#include <linux/spinlock.h>
@@ -353,11 +354,19 @@ static int smp2p_set_irq_type(struct irq_data *irqd, unsigned int type)
return 0;
}
+static void smp2p_irq_print_chip(struct irq_data *irqd, struct seq_file *p)
+{
+ struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd);
+
+ seq_printf(p, " %8s", dev_name(entry->smp2p->dev));
+}
+
static struct irq_chip smp2p_irq_chip = {
.name = "smp2p",
.irq_mask = smp2p_mask_irq,
.irq_unmask = smp2p_unmask_irq,
.irq_set_type = smp2p_set_irq_type,
+ .irq_print_chip = smp2p_irq_print_chip,
};
static int smp2p_irq_map(struct irq_domain *d,
@@ -617,7 +626,7 @@ static int qcom_smp2p_probe(struct platform_device *pdev)
ret = devm_request_threaded_irq(&pdev->dev, irq,
NULL, qcom_smp2p_intr,
IRQF_ONESHOT,
- "smp2p", (void *)smp2p);
+ NULL, (void *)smp2p);
if (ret) {
dev_err(&pdev->dev, "failed to request interrupt\n");
goto unwind_interfaces;
--
