Add the speedbin masks to ensure only the desired OPPs are available on
chips of a given bin.
Using this, add the binned 719 MHz OPP and the non-binned 124.8 MHz.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 4c9820adcf52..c1e3cec1540a 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2119,48 +2119,67 @@ zap-shader {
memory-region = <&gpu_micro_code_mem>;
};
- /* Speedbin needs more work on A740+, keep only lower freqs */
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
+ opp-719000000 {
+ opp-hz = /bits/ 64 <719000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+ opp-supported-hw = <0x1>;
+ };
+
opp-680000000 {
opp-hz = /bits/ 64 <680000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ opp-supported-hw = <0x3>;
};
opp-615000000 {
opp-hz = /bits/ 64 <615000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ opp-supported-hw = <0x3>;
};
opp-550000000 {
opp-hz = /bits/ 64 <550000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ opp-supported-hw = <0x3>;
};
opp-475000000 {
opp-hz = /bits/ 64 <475000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ opp-supported-hw = <0x3>;
};
opp-401000000 {
opp-hz = /bits/ 64 <401000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ opp-supported-hw = <0x3>;
};
opp-348000000 {
opp-hz = /bits/ 64 <348000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+ opp-supported-hw = <0x3>;
};
opp-295000000 {
opp-hz = /bits/ 64 <295000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+ opp-supported-hw = <0x3>;
};
opp-220000000 {
opp-hz = /bits/ 64 <220000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+ opp-supported-hw = <0x3>;
+ };
+
+ opp-124800000 {
+ opp-hz = /bits/ 64 <124800000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+ opp-supported-hw = <0x3>;
};
};
};
--
2.45.2
