On 23/06/2024 22:37, george chan wrote:
User-space tool can't tell so I made some guesses.
So how are you testing ?
Libcamera on your target rootfs ?
# example 1
cam -c 1 --capture=10 --file
Should deliver up ten frames to userpsace.
For me working means either
1. Sensor data delivered to user-space or
2. Minimum test pattern generator (TPG) data delivered to userspace
Here's an example of the TPG on the rb3/sdm845
# example 2
media-ctl --reset
yavta --no-query -w '0x009f0903 9' /dev/v4l-subdev4
yavta --list /dev/v4l-subdev4
media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SGRBG10_1X10/3280x2464]'
media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SGRBG10_1X10/3280x2464]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
media-ctl -d /dev/media0 -p
yavta -B capture-mplane --capture=5 -n 5 -I -f SGRBG10P -s 3280x2464
--file=TPG-SGRBG10-3280x2464-000-#.bin /dev/video2
If you can't use libcamera to do the v4l pipeline setup you can do so
yourself manually again here's rb3 setting up the pipeline and reading
from ov8856.
# example 3
media-ctl --reset
media-ctl -d /dev/media0 -V '"ov8856
'16-0010'":0[fmt:SGRBG10_1X10/3280x2464 field:none]'
media-ctl -d /dev/media0 -V '"msm_csiphy0":0[fmt:SGRBG10_1X10/3280x2464]'
media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SGRBG10_1X10/3280x2464]'
media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SGRBG10_1X10/3280x2464]'
media-ctl -l
'"msm_csiphy0":1->"msm_csid0":0[1],"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
media-ctl -d /dev/media0 -p
yavta -B capture-mplane --capture=5 -n 5 -I -f SGRBG10P -s 3280x2464
--file=ov8856-SGRBG10-3280x2464-000-#.bin /dev/video0
Maybe its an obvious question but, are you currently able to read from
either
1. The sensor - thus proving the PHY init sequence you have or
2. The TPG ?
as illustrated with one of the examples [1, 2, 3] above ?
---
bod
