From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx> Add initial device-tree for LG Leon LTE (lg-c50), currently supported features: - eMMC; - MicroSD; - usb in peripheral mode; - WiFi/BT; - vibration; - keys. Signed-off-by: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx> Signed-off-by: Nikita Travkin <nikita@xxxxxxx> --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts | 140 ++++++++++++++++++++++++++++ 2 files changed, 141 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index b35e46d75a1d..919dfcb26d15 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -31,6 +31,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-gplus-fl8005a.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-lg-c50.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-lg-m216.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts b/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts new file mode 100644 index 000000000000..a823a1c40208 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "LG Leon LTE"; + compatible = "lg,c50", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + volume-up-button { + label = "Volume Up"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down-button { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <5000>; + + pinctrl-0 = <&sd_vmmc_en_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&pm8916_usbin { + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <®_sd_vmmc>; + + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&usb { + dr_mode = "peripheral"; + extcon = <&pm8916_usbin>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&pm8916_usbin>; +}; + +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sd_vmmc_en_default: sd-vmmc-en-default-state { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; -- 2.45.2