On Fri, Jun 21, 2024 at 05:16:51PM GMT, Gokul Sriram Palanisamy wrote: > IPQ8074 needs support for secure pil as well. > Also, currently only unified firmware is supported. > IPQ8074 supports split firmware for q6 and m3, so > adding support for that. > > changes since v8: > - Rebased on top of Linux 6.10-rc4 Why do you have so many dead email addresses in you To/Cc lists? > > Gokul Sriram Palanisamy (8): > remoteproc: qcom: Add PRNG proxy clock > remoteproc: qcom: Add secure PIL support > remoteproc: qcom: Add support for split q6 + m3 wlan firmware > remoteproc: qcom: Add ssr subdevice identifier > remoteproc: qcom: Update regmap offsets for halt register > dt-bindings: clock: qcom: Add reset for WCSSAON > clk: qcom: Add WCSSAON reset > arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC > > arch/arm64/boot/dts/qcom/ipq8074.dtsi | 80 +++++++++ > drivers/clk/qcom/gcc-ipq8074.c | 1 + > drivers/remoteproc/qcom_q6v5_wcss.c | 162 +++++++++++++++---- > include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 + > 4 files changed, 212 insertions(+), 32 deletions(-) > > -- > 2.34.1 > -- With best wishes Dmitry
