It is difficult to add OPP table for sdhci node due to lack of datasheet and other data. Limit the maximum clock frequency of sdcc to avoid overclocking SD/eMMC cards. Changes in v6: Adjust the maximum clock frequency of sdcc to 200 MHz. Changes in v5: Move LDOA2 regulator patch to other series. Changes in v4: Change 'enable' to 'add' of the commit title. Changes in v3: Remove always-on for LDOA2 regulator. Remove 1.8v properties of the node added in dtsi. Changes in v2: Add LDOA2 regulator to support SDCC voltage scaling. Chukun Pan (2): clk: qcom: gcc-ipq6018: update sdcc max clock frequency arm64: dts: qcom: ipq6018: add sdhci node arch/arm64/boot/dts/qcom/ipq6018.dtsi | 19 +++++++++++++++++++ drivers/clk/qcom/gcc-ipq6018.c | 2 +- 2 files changed, 20 insertions(+), 1 deletion(-) -- 2.25.1
