From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> The following series introduces various related changes that allow supporting 2.5G ethernet on the sa8775p-ride board. First two patches add support for the new SGMII mode in PHY core and the dwmac-qcom-ethqos driver. Next three introduce support for a new PHY model to the aquantia driver (while at it: fix two issues I noticed). Final three provide a way to work around a DMA reset issue on the sa8775p-ride board where RX clocks from the PHY are not available during the reset. Bartosz Golaszewski (8): net: phy: add support for overclocked SGMII net: stmmac: qcom-ethqos: add support for 2.5G overlocked SGMII mode net: phy: aquantia: add missing include guards net: phy: aquantia: add support for aqr115c net: phy: aquantia: wait for FW reset before checking the vendor ID net: stmmac: provide the link_up() callback net: stmmac: provide the open() callback net: stmmac: qcom-ethqos: add a DMA-reset quirk for sa8775p-ride-r3 .../stmicro/stmmac/dwmac-qcom-ethqos.c | 44 +++++++++++++++++ .../net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++ drivers/net/phy/aquantia/aquantia.h | 6 +++ drivers/net/phy/aquantia/aquantia_firmware.c | 4 ++ drivers/net/phy/aquantia/aquantia_main.c | 47 +++++++++++++++++-- drivers/net/phy/phy-core.c | 1 + drivers/net/phy/phylink.c | 13 ++++- include/linux/phy.h | 4 ++ include/linux/stmmac.h | 2 + 9 files changed, 121 insertions(+), 6 deletions(-) -- 2.43.0
