From: André Apitzsch <git@xxxxxxxxxxx>
Add alert interrupt for the temperature sensor of Motorola Moto G 4G
(2013), although not used by the driver yet.
Signed-off-by: André Apitzsch <git@xxxxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
index 50ae3cfc95bb..cff9415baa46 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -125,6 +125,10 @@ reg_lcd_neg: outn {
sensor@48 {
compatible = "ti,tmp108";
reg = <0x48>;
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&temp_alert_default>;
+ pinctrl-names = "default";
+ #thermal-sensor-cells = <0>;
};
};
@@ -361,6 +365,14 @@ reg_lcd_default: reg-lcd-default-state {
bias-disable;
output-high;
};
+
+ temp_alert_default: temp-alert-default-state {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-disable;
+ };
};
&usb {
--
2.45.2
