[PATCH v3 01/41] iio: accel: fxls8962af-core: Make use of regmap_set_bits(), regmap_clear_bits()

[Trevor Gamblin <tgamblin@xxxxxxxxxxxx>]

Instead of using regmap_update_bits() and passing the mask twice, use
regmap_set_bits().

Instead of using regmap_update_bits() and passing val = 0, use
regmap_clear_bits().

Suggested-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
Signed-off-by: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
---
 drivers/iio/accel/fxls8962af-core.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/accel/fxls8962af-core.c b/drivers/iio/accel/fxls8962af-core.c
index 4fbc01bda62e..d25e31613413 100644
--- a/drivers/iio/accel/fxls8962af-core.c
+++ b/drivers/iio/accel/fxls8962af-core.c
@@ -228,8 +228,8 @@ static int fxls8962af_power_off(struct fxls8962af_data *data)
 
 static int fxls8962af_standby(struct fxls8962af_data *data)
 {
-	return regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
-				  FXLS8962AF_SENS_CONFIG1_ACTIVE, 0);
+	return regmap_clear_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
+				 FXLS8962AF_SENS_CONFIG1_ACTIVE);
 }
 
 static int fxls8962af_active(struct fxls8962af_data *data)
@@ -785,9 +785,8 @@ static int fxls8962af_reset(struct fxls8962af_data *data)
 	unsigned int reg;
 	int ret;
 
-	ret = regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
-				 FXLS8962AF_SENS_CONFIG1_RST,
-				 FXLS8962AF_SENS_CONFIG1_RST);
+	ret = regmap_set_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
+			      FXLS8962AF_SENS_CONFIG1_RST);
 	if (ret)
 		return ret;
 
@@ -830,9 +829,8 @@ static int fxls8962af_buffer_postenable(struct iio_dev *indio_dev)
 	fxls8962af_standby(data);
 
 	/* Enable buffer interrupt */
-	ret = regmap_update_bits(data->regmap, FXLS8962AF_INT_EN,
-				 FXLS8962AF_INT_EN_BUF_EN,
-				 FXLS8962AF_INT_EN_BUF_EN);
+	ret = regmap_set_bits(data->regmap, FXLS8962AF_INT_EN,
+			      FXLS8962AF_INT_EN_BUF_EN);
 	if (ret)
 		return ret;
 
@@ -851,8 +849,8 @@ static int fxls8962af_buffer_predisable(struct iio_dev *indio_dev)
 	fxls8962af_standby(data);
 
 	/* Disable buffer interrupt */
-	ret = regmap_update_bits(data->regmap, FXLS8962AF_INT_EN,
-				 FXLS8962AF_INT_EN_BUF_EN, 0);
+	ret = regmap_clear_bits(data->regmap, FXLS8962AF_INT_EN,
+				FXLS8962AF_INT_EN_BUF_EN);
 	if (ret)
 		return ret;
 

-- 
2.45.2