The SCMI QCOM vendor protocol provides a generic way of exposing a number of Qualcomm SoC specific features (like memory bus scaling) through a mixture of pre-determined algorithm strings and param_id pairs hosted on the SCMI controller. Co-developed-by: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx> Signed-off-by: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx> Co-developed-by: Ramakrishna Gottimukkula <quic_rgottimu@xxxxxxxxxxx> Signed-off-by: Ramakrishna Gottimukkula <quic_rgottimu@xxxxxxxxxxx> Co-developed-by: Amir Vajid <avajid@xxxxxxxxxxx> Signed-off-by: Amir Vajid <avajid@xxxxxxxxxxx> Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx> --- v1: * Rebase on top of Cristian's "SCMI multiple vendor protocol support" series. [Cristian] * Add more documentation wherever possible. [Sudeep] drivers/firmware/arm_scmi/vendors/Kconfig | 12 ++ drivers/firmware/arm_scmi/vendors/Makefile | 2 +- .../arm_scmi/vendors/qcom_scmi_vendor.c | 184 ++++++++++++++++++ include/linux/qcom_scmi_vendor.h | 39 ++++ 4 files changed, 236 insertions(+), 1 deletion(-) create mode 100644 drivers/firmware/arm_scmi/vendors/qcom_scmi_vendor.c create mode 100644 include/linux/qcom_scmi_vendor.h diff --git a/drivers/firmware/arm_scmi/vendors/Kconfig b/drivers/firmware/arm_scmi/vendors/Kconfig index 7c1ca7a12603..6bff4550fa25 100644 --- a/drivers/firmware/arm_scmi/vendors/Kconfig +++ b/drivers/firmware/arm_scmi/vendors/Kconfig @@ -1,4 +1,16 @@ # SPDX-License-Identifier: GPL-2.0-only menu "ARM SCMI Vendor Protocols" +config ARM_SCMI_PROTOCOL_VENDOR_QCOM + tristate "Qualcomm Technologies, Inc. Qcom SCMI vendor Protocol" + depends on ARM_SCMI_PROTOCOL || COMPILE_TEST + help + The SCMI QCOM vendor protocol provides a generic way of exposing a + number of Qualcomm SoC specific features (like memory bus scaling) + through a mixture of pre-determined algorithm strings and param_id + pairs hosted on the SCMI controller. + + This driver defines/documents the message ID's used for this + communication and also exposes the ops used by the clients. + endmenu diff --git a/drivers/firmware/arm_scmi/vendors/Makefile b/drivers/firmware/arm_scmi/vendors/Makefile index c6c214158dd8..c1d6a355f579 100644 --- a/drivers/firmware/arm_scmi/vendors/Makefile +++ b/drivers/firmware/arm_scmi/vendors/Makefile @@ -1,2 +1,2 @@ # SPDX-License-Identifier: GPL-2.0-only -# obj-$(CONFIG_ARM_SCMI_PROTOCOL_<your_vendor_proto>) += <your_vendor_proto>.o +obj-$(CONFIG_ARM_SCMI_PROTOCOL_VENDOR_QCOM) += qcom_scmi_vendor.o diff --git a/drivers/firmware/arm_scmi/vendors/qcom_scmi_vendor.c b/drivers/firmware/arm_scmi/vendors/qcom_scmi_vendor.c new file mode 100644 index 000000000000..e02163381d4b --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/qcom_scmi_vendor.c @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <linux/qcom_scmi_vendor.h> + +#include "../common.h" + +/** + * qcom_scmi_vendor_protocol_cmd - vendor specific commands supported by Qualcomm SCMI + * vendor protocol. + * + * This protocol is intended as a generic way of exposing a number of Qualcomm SoC + * specific features through a mixture of pre-determined algorithm string and param_id + * pairs hosted on the SCMI controller. + * + * The QCOM SCMI Vendor Protocol has the protocol id as 0x80 and vendor id set to + * Qualcomm and the implementation version set to 0x20000. The PROTOCOL_VERSION command + * returns version 1.0. + * + * @QCOM_SCMI_SET_PARAM: message_id: 0x10 is used to set the parameter of a specific algo_str + * hosted on QCOM SCMI Vendor Protocol. The tx len depends on the + * algo_str used. + * @QCOM_SCMI_GET_PARAM: message_id: 0x11 is used to get parameter information of a specific + * algo_str hosted on QCOM SCMI Vendor Protocol. The tx and rx len + * depends on the algo_str used. + * @QCOM_SCMI_START_ACTIVITY: message_id: 0x12 is used to start the activity performed by + * the algo_str. + * @QCOM_SCMI_STOP_ACTIVITY: message_id: 0x13 is used to stop a pre-existing activity + * performed by the algo_str. + */ +enum qcom_scmi_vendor_protocol_cmd { + QCOM_SCMI_SET_PARAM = 0x10, + QCOM_SCMI_GET_PARAM = 0x11, + QCOM_SCMI_START_ACTIVITY = 0x12, + QCOM_SCMI_STOP_ACTIVITY = 0x13, +}; + +/** + * struct qcom_scmi_msg - represents the various parameters to be populated + * for using the QCOM SCMI Vendor Protocol + * + * @ext_id: reserved, must be zero + * @algo_low: lower 32 bits of the algo_str + * @algo_high: upper 32 bits of the algo_str + * @param_id: serves as token message id to the specific algo_str + * @buf: serves as the payload to the specified param_id and algo_str pair + */ +struct qcom_scmi_msg { + __le32 ext_id; + __le32 algo_low; + __le32 algo_high; + __le32 param_id; + __le32 buf[]; +}; + +static int qcom_scmi_set_param(const struct scmi_protocol_handle *ph, void *buf, u64 algo_str, + u32 param_id, size_t size) +{ + struct scmi_xfer *t; + struct qcom_scmi_msg *msg; + int ret; + + ret = ph->xops->xfer_get_init(ph, QCOM_SCMI_SET_PARAM, size + sizeof(*msg), 0, &t); + if (ret) + return ret; + + msg = t->tx.buf; + msg->algo_low = cpu_to_le32(lower_32_bits(algo_str)); + msg->algo_high = cpu_to_le32(upper_32_bits(algo_str)); + msg->param_id = cpu_to_le32(param_id); + + memcpy(msg->buf, buf, t->tx.len - sizeof(*msg)); + + ret = ph->xops->do_xfer(ph, t); + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int qcom_scmi_get_param(const struct scmi_protocol_handle *ph, void *buf, u64 algo_str, + u32 param_id, size_t tx_size, size_t rx_size) +{ + struct scmi_xfer *t; + struct qcom_scmi_msg *msg; + int ret; + + ret = ph->xops->xfer_get_init(ph, QCOM_SCMI_GET_PARAM, tx_size + sizeof(*msg), rx_size, &t); + if (ret) + return ret; + + msg = t->tx.buf; + msg->algo_low = cpu_to_le32(lower_32_bits(algo_str)); + msg->algo_high = cpu_to_le32(upper_32_bits(algo_str)); + msg->param_id = cpu_to_le32(param_id); + memcpy(msg->buf, buf, t->tx.len - sizeof(*msg)); + + ret = ph->xops->do_xfer(ph, t); + memcpy(buf, t->rx.buf, t->rx.len); + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int qcom_scmi_start_activity(const struct scmi_protocol_handle *ph, + void *buf, u64 algo_str, u32 param_id, size_t size) +{ + struct scmi_xfer *t; + struct qcom_scmi_msg *msg; + int ret; + + ret = ph->xops->xfer_get_init(ph, QCOM_SCMI_START_ACTIVITY, size + sizeof(*msg), 0, &t); + if (ret) + return ret; + + msg = t->tx.buf; + msg->algo_low = cpu_to_le32(lower_32_bits(algo_str)); + msg->algo_high = cpu_to_le32(upper_32_bits(algo_str)); + msg->param_id = cpu_to_le32(param_id); + + memcpy(msg->buf, buf, t->tx.len - sizeof(*msg)); + + ret = ph->xops->do_xfer(ph, t); + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int qcom_scmi_stop_activity(const struct scmi_protocol_handle *ph, void *buf, u64 algo_str, + u32 param_id, size_t size) +{ + struct scmi_xfer *t; + struct qcom_scmi_msg *msg; + int ret; + + ret = ph->xops->xfer_get_init(ph, QCOM_SCMI_STOP_ACTIVITY, size + sizeof(*msg), 0, &t); + if (ret) + return ret; + + msg = t->tx.buf; + msg->algo_low = cpu_to_le32(lower_32_bits(algo_str)); + msg->algo_high = cpu_to_le32(upper_32_bits(algo_str)); + msg->param_id = cpu_to_le32(param_id); + + memcpy(msg->buf, buf, t->tx.len - sizeof(*msg)); + + ret = ph->xops->do_xfer(ph, t); + ph->xops->xfer_put(ph, t); + + return ret; +} + +static struct qcom_scmi_vendor_ops qcom_proto_ops = { + .set_param = qcom_scmi_set_param, + .get_param = qcom_scmi_get_param, + .start_activity = qcom_scmi_start_activity, + .stop_activity = qcom_scmi_stop_activity, +}; + +static int qcom_scmi_vendor_protocol_init(const struct scmi_protocol_handle *ph) +{ + u32 version; + + ph->xops->version_get(ph, &version); + + dev_dbg(ph->dev, "SCMI QCOM Vendor Version %d.%d\n", + PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version)); + + return 0; +} + +static const struct scmi_protocol qcom_scmi_vendor = { + .id = QCOM_SCMI_VENDOR_PROTOCOL, + .owner = THIS_MODULE, + .instance_init = &qcom_scmi_vendor_protocol_init, + .ops = &qcom_proto_ops, + .vendor_id = "Qualcomm", + .impl_ver = 0x20000, +}; +module_scmi_protocol(qcom_scmi_vendor); + +MODULE_DESCRIPTION("QTI SCMI vendor protocol"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/qcom_scmi_vendor.h b/include/linux/qcom_scmi_vendor.h new file mode 100644 index 000000000000..60f85fedee80 --- /dev/null +++ b/include/linux/qcom_scmi_vendor.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * QTI SCMI vendor protocol's header + * + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _QCOM_SCMI_VENDOR_H +#define _QCOM_SCMI_VENDOR_H + +#include <linux/bitfield.h> +#include <linux/device.h> +#include <linux/types.h> + +#define QCOM_SCMI_VENDOR_PROTOCOL 0x80 + +struct scmi_protocol_handle; + +/** + * struct qcom_scmi_vendor_ops - represents the various operations provided + * by QCOM SCMI Vendor Protocol + * + * @set_param: set parameter specified by param_id and algo_str pair. + * @get_param: retrieve parameter specified by param_id and algo_str pair. + * @start_activity: initiate a specific activity defined by algo_str. + * @stop_activity: halt previously initiated activity defined by algo_str. + */ +struct qcom_scmi_vendor_ops { + int (*set_param)(const struct scmi_protocol_handle *ph, void *buf, u64 algo_str, + u32 param_id, size_t size); + int (*get_param)(const struct scmi_protocol_handle *ph, void *buf, u64 algo_str, + u32 param_id, size_t tx_size, size_t rx_size); + int (*start_activity)(const struct scmi_protocol_handle *ph, void *buf, u64 algo_str, + u32 param_id, size_t size); + int (*stop_activity)(const struct scmi_protocol_handle *ph, void *buf, u64 algo_str, + u32 param_id, size_t size); +}; + +#endif /* _QCOM_SCMI_VENDOR_H */ -- 2.34.1