On Tue, 07 May 2024 16:48:14 +0200, Johan Hovold wrote:
> The Elan eKTH5015M touch controller on the X13s requires a 300 ms delay
> before sending commands after having deasserted reset during power on.
>
> This series switches the X13s devicetree to use the Elan specific
> binding so that the OS can determine the required power-on sequence and
> make sure that the controller is always detected during boot. [1]
>
> [...]
Applied to hid/hid.git (for-6.10/upstream-fixes), thanks!
[1/7] dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
https://git.kernel.org/hid/hid/c/8d3ae46c6433
[2/7] dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
https://git.kernel.org/hid/hid/c/07fc16fa5552
[3/7] dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
https://git.kernel.org/hid/hid/c/e538d4b85b8f
[4/7] HID: i2c-hid: elan: fix reset suspend current leakage
https://git.kernel.org/hid/hid/c/0eafc58f2194
Cheers,
--
Benjamin Tissoires <bentiss@xxxxxxxxxx>
