[PATCH v3 0/4] HDMI TX support in msm8998

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



DT bits required for HDMI TX support in APQ8098 (msm8998 cousin)

Supersedes <a2cb1290-9e01-4136-9592-ce439b1096b6@xxxxxxxxxx>

Changes in v3
- Address Rob's comments on patch 2:
  - 'maxItems: 5' for clocks in the 8996 if/then schema
  - match the order of 8996 for the clock-names in common

---
Arnaud Vrac (1):
      arm64: dts: qcom: add HDMI nodes for msm8998

Marc Gonzalez (3):
      dt-bindings: display/msm: hdmi: add qcom,hdmi-phy-8998
      dt-bindings: display/msm: hdmi: add qcom,hdmi-tx-8998
      arm64: dts: qcom: msm8998: add HDMI GPIOs

 .../devicetree/bindings/display/msm/hdmi.yaml      |  28 ++++-
 .../devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml |   1 +
 arch/arm64/boot/dts/qcom/msm8998.dtsi              | 128 ++++++++++++++++++++-
 3 files changed, 154 insertions(+), 3 deletions(-)
---
base-commit: 2c4f4d94dcbf6f500b92fff5600989ea23a207e8
change-id: 20240606-hdmi-tx-00ee8e7ddbac

Best regards,
-- 
Marc Gonzalez <mgonzalez@xxxxxxxxxx>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux