Re: [PATCH v2 0/2] arm64: dts: qcom: switch RB1 and RB2 platforms to i2c2-gpio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 05 Jun 2024 11:55:55 +0300, Dmitry Baryshkov wrote:
> On the Qualcomm RB1 and RB2 platforms the I2C bus connected to the
> LT9611UXC bridge under some circumstances can go into a state when all
> transfers timeout. This causes both issues with fetching of EDID and
> with updating of the bridge's firmware.
> 
> While we are debugging the issue, switch corresponding I2C bus to use
> i2c-gpio driver. While using i2c-gpio no communication issues are
> observed.
> 
> [...]

Applied, thanks!

[1/2] arm64: dts: qcom: qrb2210-rb1: switch I2C2 to i2c-gpio
      commit: b7b545ccc08873e107aa24c461b1fdb123dd3761
[2/2] arm64: dts: qcom: qrb4210-rb2: switch I2C2 to i2c-gpio
      commit: f77e7bd40c3c2d79685e9cc80de874b69a976f55

Best regards,
-- 
Bjorn Andersson <andersson@xxxxxxxxxx>




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux