Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index e07d0311ecb5..f6870d3f2886 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -520,7 +520,7 @@ touchscreen@48 {
compatible = "samsung,s6sy761";
reg = <0x48>;
interrupt-parent = <&tlmm>;
- interrupts = <39 0x2008>;
+ interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
/* It's "vddio" downstream but it works anyway! */
vdd-supply = <&vreg_l1c_1p8>;
avdd-supply = <&vreg_l10c_3p3>;
--
2.43.0
