[PATCH v1 6/8] spi: pci1xxxx: Use new spi_xfer_is_dma_mapped() helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/spi/spi-pci1xxxx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pci1xxxx.c b/drivers/spi/spi-pci1xxxx.c
index cc18d320370f..fc98979eba48 100644
--- a/drivers/spi/spi-pci1xxxx.c
+++ b/drivers/spi/spi-pci1xxxx.c
@@ -6,6 +6,7 @@
 
 
 #include <linux/bitfield.h>
+#include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/iopoll.h>
 #include <linux/irq.h>
@@ -15,7 +16,7 @@
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/spi/spi.h>
-#include <linux/delay.h>
+#include "internals.h"
 
 #define DRV_NAME "spi-pci1xxxx"
 
@@ -567,7 +568,7 @@ static int pci1xxxx_spi_transfer_with_dma(struct spi_controller *spi_ctlr,
 static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr,
 				     struct spi_device *spi, struct spi_transfer *xfer)
 {
-	if (spi_ctlr->can_dma(spi_ctlr, spi, xfer) && spi_ctlr->cur_msg_mapped)
+	if (spi_xfer_is_dma_mapped(spi_ctlr, spi, xfer))
 		return pci1xxxx_spi_transfer_with_dma(spi_ctlr, spi, xfer);
 	else
 		return pci1xxxx_spi_transfer_with_io(spi_ctlr, spi, xfer);
-- 
2.43.0.rc1.1336.g36b5255a03ac





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux