On Mon, May 27, 2024 at 11:07:27AM +0300, Abel Vesa wrote:
> All PHYs, being QMP combo type, implement both USB and DP. Add the port
> nodes for high-speed, super-speed and DP to all 3 PHYs belonging to
> USB1. Also add the counterpart nodes for the DWC3 controllers.
>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/x1e80100.dtsi | 123 +++++++++++++++++++++++++++++++--
> 1 file changed, 117 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> index 5f90a0b3c016..63e85c5ea6c9 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -2543,6 +2543,29 @@ usb_1_ss0_qmpphy: phy@fd5000 {
> #phy-cells = <1>;
>
> status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usb_1_ss0_qmpphy_out: endpoint {};
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + usb_1_ss0_qmpphy_usb_ss_in: endpoint {};
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + usb_1_ss0_qmpphy_dp_in: endpoint {};
Unless the configuration is dynamic or platform-dependent, please link DWC3, QMP PHY and DP nodes in the SoC.dtsi.
> + };
> + };
> };
>
> usb_1_ss1_hsphy: phy@fd9000 {
> @@ -2583,6 +2606,29 @@ usb_1_ss1_qmpphy: phy@fda000 {
> #phy-cells = <1>;
>
> status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usb_1_ss1_qmpphy_out: endpoint {};
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + usb_1_ss1_qmpphy_usb_ss_in: endpoint {};
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + usb_1_ss1_qmpphy_dp_in: endpoint {};
> + };
> + };
> };
>
> usb_1_ss2_hsphy: phy@fde000 {
> @@ -2623,6 +2669,29 @@ usb_1_ss2_qmpphy: phy@fdf000 {
> #phy-cells = <1>;
>
> status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usb_1_ss2_qmpphy_out: endpoint {};
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + usb_1_ss2_qmpphy_usb_ss_in: endpoint {};
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + usb_1_ss2_qmpphy_dp_in: endpoint {};
> + };
> + };
> };
>
> cnoc_main: interconnect@1500000 {
> @@ -3445,8 +3514,22 @@ usb_1_ss2_dwc3: usb@a000000 {
>
> dma-coherent;
>
> - port {
> - usb_1_ss2_role_switch: endpoint {
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usb_1_ss2_dwc3_hs: endpoint {
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + usb_1_ss2_dwc3_ss: endpoint {
> + };
> };
> };
> };
> @@ -3590,8 +3673,22 @@ usb_1_ss0_dwc3: usb@a600000 {
>
> dma-coherent;
>
> - port {
> - usb_1_ss0_role_switch: endpoint {
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usb_1_ss0_dwc3_hs: endpoint {
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + usb_1_ss0_dwc3_ss: endpoint {
> + };
> };
> };
> };
> @@ -3673,8 +3770,22 @@ usb_1_ss1_dwc3: usb@a800000 {
>
> dma-coherent;
>
> - port {
> - usb_1_ss1_role_switch: endpoint {
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usb_1_ss1_dwc3_hs: endpoint {
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + usb_1_ss1_dwc3_ss: endpoint {
> + };
> };
> };
> };
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
