Re: [PATCH v5 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 20, 2024 at 02:00:14PM GMT, Unnathi Chalicheemala wrote:
> Define new regmap structure for Broadcast_AND region and initialize
> this regmap when HW block version is greater than 4.1, otherwise
> initialize as a NULL pointer for backwards compatibility.
> 
> Switch from broadcast_OR to broadcast_AND region (when defined in DT)
> for checking status bit 1 as Broadcast_OR region checks only for bit 0.
> 

This is a good technical description of the change you're making. But
it's been long enough since we discussed this that I've forgotten which
problem it solves, and the commit message doesn't tell me.

Please add a paragraph on the top describing the actual problem this
solves?

Regards,
Bjorn

> Signed-off-by: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
> Reviewed-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
>  drivers/soc/qcom/llcc-qcom.c       | 16 +++++++++++++++-
>  include/linux/soc/qcom/llcc-qcom.h |  4 +++-
>  2 files changed, 18 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
> index cbef0dea1d5d..5eac6aa567e7 100644
> --- a/drivers/soc/qcom/llcc-qcom.c
> +++ b/drivers/soc/qcom/llcc-qcom.c
> @@ -821,6 +821,7 @@ EXPORT_SYMBOL_GPL(llcc_slice_putd);
>  static int llcc_update_act_ctrl(u32 sid,
>  				u32 act_ctrl_reg_val, u32 status)
>  {
> +	struct regmap *regmap;
>  	u32 act_ctrl_reg;
>  	u32 act_clear_reg;
>  	u32 status_reg;
> @@ -849,7 +850,8 @@ static int llcc_update_act_ctrl(u32 sid,
>  		return ret;
>  
>  	if (drv_data->version >= LLCC_VERSION_4_1_0_0) {
> -		ret = regmap_read_poll_timeout(drv_data->bcast_regmap, status_reg,
> +		regmap = drv_data->bcast_and_regmap ?: drv_data->bcast_regmap;
> +		ret = regmap_read_poll_timeout(regmap, status_reg,
>  				      slice_status, (slice_status & ACT_COMPLETE),
>  				      0, LLCC_STATUS_READ_DELAY);
>  		if (ret)
> @@ -1284,6 +1286,18 @@ static int qcom_llcc_probe(struct platform_device *pdev)
>  
>  	drv_data->version = version;
>  
> +	/* Applicable only when drv_data->version >= 4.1 */
> +	if (drv_data->version >= LLCC_VERSION_4_1_0_0) {
> +		drv_data->bcast_and_regmap = qcom_llcc_init_mmio(pdev, i + 1, "llcc_broadcast_and_base");
> +		if (IS_ERR(drv_data->bcast_and_regmap)) {
> +			ret = PTR_ERR(drv_data->bcast_and_regmap);
> +			if (ret == -EINVAL)
> +				drv_data->bcast_and_regmap = NULL;
> +			else
> +				goto err;
> +		}
> +	}
> +
>  	llcc_cfg = cfg->sct_data;
>  	sz = cfg->size;
>  
> diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
> index 1a886666bbb6..9e9f528b1370 100644
> --- a/include/linux/soc/qcom/llcc-qcom.h
> +++ b/include/linux/soc/qcom/llcc-qcom.h
> @@ -115,7 +115,8 @@ struct llcc_edac_reg_offset {
>  /**
>   * struct llcc_drv_data - Data associated with the llcc driver
>   * @regmaps: regmaps associated with the llcc device
> - * @bcast_regmap: regmap associated with llcc broadcast offset
> + * @bcast_regmap: regmap associated with llcc broadcast OR offset
> + * @bcast_and_regmap: regmap associated with llcc broadcast AND offset
>   * @cfg: pointer to the data structure for slice configuration
>   * @edac_reg_offset: Offset of the LLCC EDAC registers
>   * @lock: mutex associated with each slice
> @@ -129,6 +130,7 @@ struct llcc_edac_reg_offset {
>  struct llcc_drv_data {
>  	struct regmap **regmaps;
>  	struct regmap *bcast_regmap;
> +	struct regmap *bcast_and_regmap;
>  	const struct llcc_slice_config *cfg;
>  	const struct llcc_edac_reg_offset *edac_reg_offset;
>  	struct mutex lock;
> -- 
> 2.34.1
> 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux