[PATCH] tty: amba-pl011: Use 32-bit accesses for SBSA UART

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Christopher Covington <christopher.covington@xxxxxxxxxx>

Version 2 of the Server Base System Architecture (SBSA) describes the
Generic UART registers as 32 bits wide. At least one implementation, found
of the Qualcomm Technologies QDF2432, only supports 32 bit accesses. While
other implementations may also support smaller sized accesses, simply use
32 bit accesses all the time for the SBSA UART for simple, broad,
compatibility.

Signed-off-by: Christopher Covington <cov@xxxxxxxxxxxxxx>
---
 drivers/tty/serial/amba-pl011.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c0da0cc..ffb5eb8 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -121,6 +121,7 @@ static struct vendor_data vendor_arm = {
 
 static struct vendor_data vendor_sbsa = {
 	.reg_offset		= pl011_std_offsets,
+	.access_32b		= true,
 	.oversampling		= false,
 	.dma_threshold		= false,
 	.cts_event_workaround	= false,
-- 
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux