[PATCH v11 3/3] arm64: dts: qcom: sa8775p: Add ep pcie0 controller node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add ep pcie dtsi node for pcie0 controller found on sa8775p platform.
It supports gen4 and x2 link width. Limiting the speed to Gen3 due to
stability issues.

Signed-off-by: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 46 +++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 31de7359..4084e77 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -3689,6 +3689,52 @@
 		};
 	};
 
+	pcie0_ep: pcie-ep@1c00000 {
+		compatible = "qcom,sa8775p-pcie-ep";
+		reg = <0x0 0x01c00000 0x0 0x3000>,
+		      <0x0 0x40000000 0x0 0xf20>,
+		      <0x0 0x40000f20 0x0 0xa8>,
+		      <0x0 0x40001000 0x0 0x4000>,
+		      <0x0 0x40200000 0x0 0x100000>,
+		      <0x0 0x01c03000 0x0 0x1000>,
+		      <0x0 0x40005000 0x0 0x2000>;
+		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+			    "mmio", "dma";
+
+		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+			<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+			<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+			<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+			<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+
+		clock-names = "aux",
+			      "cfg",
+			      "bus_master",
+			      "bus_slave",
+			      "slave_q2a";
+
+		interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-names = "global", "doorbell", "dma";
+
+		interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+		interconnect-names = "pcie-mem", "cpu-pcie";
+
+		iommus = <&pcie_smmu 0x0000 0x7f>;
+		resets = <&gcc GCC_PCIE_0_BCR>;
+		reset-names = "core";
+		power-domains = <&gcc PCIE_0_GDSC>;
+		phys = <&pcie0_phy>;
+		phy-names = "pciephy";
+		max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
+		num-lanes = <2>;
+
+		status = "disabled";
+	};
+
 	pcie0_phy: phy@1c04000 {
 		compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
 		reg = <0x0 0x1c04000 0x0 0x2000>;
-- 
2.7.4





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux