Re: [PATCH v3 6/7] phy: qcom-qmp-pcie: add support for ipq9574 gen3x2 PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 29 Apr 2024 at 09:20, Varadarajan Narayanan
<quic_varada@xxxxxxxxxxx> wrote:
>
> On Wed, Apr 17, 2024 at 12:50:49AM +0300, Dmitry Baryshkov wrote:
> > On Wed, 17 Apr 2024 at 00:25, Alex G. <mr.nuke.me@xxxxxxxxx> wrote:
> > >
> > > Hi Dmitry,
> > >
> > > On 4/15/24 16:25, mr.nuke.me@xxxxxxxxx wrote:
> > > >
> > > >
> > > > On 4/15/24 15:10, Dmitry Baryshkov wrote:
> > > >> On Mon, 15 Apr 2024 at 21:23, Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
> > > >> wrote:
> > > >>>
> > > >>> Add support for the gen3x2 PCIe PHY on IPQ9574, ported form downstream
> > > >>> 5.4 kernel. Only the serdes and pcs_misc tables are new, the others
> > > >>> being reused from IPQ8074 and IPQ6018 PHYs.
> > > >>>
> > > >>> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
> > > >>> ---
> > > >>>   drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      | 136 +++++++++++++++++-
> > > >>>   .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h   |  14 ++
> > > >>>   2 files changed, 149 insertions(+), 1 deletion(-)
> > > >>>
> > > >>
> > > >> [skipped]
> > > >>
> > > >>> @@ -2448,7 +2542,7 @@ static inline void qphy_clrbits(void __iomem
> > > >>> *base, u32 offset, u32 val)
> > > >>>
> > > >>>   /* list of clocks required by phy */
> > > >>>   static const char * const qmp_pciephy_clk_l[] = {
> > > >>> -       "aux", "cfg_ahb", "ref", "refgen", "rchng", "phy_aux",
> > > >>> +       "aux", "cfg_ahb", "ref", "refgen", "rchng", "phy_aux",
> > > >>> "anoc", "snoc"
> > > >>
> > > >> Are the NoC clocks really necessary to drive the PHY? I think they are
> > > >> usually connected to the controllers, not the PHYs.
> > > >
> > > > The system will hang if these clocks are not enabled. They are also
> > > > attached to the PHY in the QCA 5.4 downstream kernel.
> >
> > Interesting.
> > I see that Varadarajan is converting these clocks into interconnects.
> > Maybe it's better to wait for those patches to land and use
> > interconnects instead. I think it would better suit the
> > infrastructure.
> >
> > Varadarajan, could you please comment, are these interconnects
> > connected to the PHY too or just to the PCIe controller?
>
> Sorry for the late response. Missed this e-mail.
>
> These 2 clks are related to AXI port clk on Aggnoc/SNOC, not
> directly connected to PCIE wrapper, but it should be enabled to
> generate pcie traffic.

So, are they required for the PHY or are they required for the PCIe
controller only?

>
> Thanks
> Varada
>
> > > They are named "anoc_lane", and "snoc_lane" in the downstream kernel.
> > > Would you like me to use these names instead?
> >
> > I'm fine either way.
> >



-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux