On Fri, Apr 26, 2024 at 2:31 PM Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> On Fri, 26 Apr 2024 at 15:35, Connor Abbott <cwabbott0@xxxxxxxxx> wrote:
> >
> > On Fri, Apr 26, 2024 at 12:02 AM Dmitry Baryshkov
> > <dmitry.baryshkov@xxxxxxxxxx> wrote:
> > >
> > > On Thu, 25 Apr 2024 at 16:44, Connor Abbott <cwabbott0@xxxxxxxxx> wrote:
> > > >
> > > > On all Qualcomm platforms with a7xx GPUs, qcom_scm provides a method to
> > > > initialize cx_mem. Copy this from downstream (minus BCL which we
> > > > currently don't support). On a750, this includes a new "fuse" register
> > > > which can be used by qcom_scm to fuse off certain features like
> > > > raytracing in software. The fuse is default off, and is initialized by
> > > > calling the method. Afterwards we have to read it to find out which
> > > > features were enabled.
> > > >
> > > > Signed-off-by: Connor Abbott <cwabbott0@xxxxxxxxx>
> > > > ---
> > > > drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 89 ++++++++++++++++++++++++-
> > > > drivers/gpu/drm/msm/adreno/adreno_gpu.h | 2 +
> > > > 2 files changed, 90 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> > > > index cf0b1de1c071..fb2722574ae5 100644
> > > > --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> > > > +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> > > > @@ -10,6 +10,7 @@
> > > >
> > > > #include <linux/bitfield.h>
> > > > #include <linux/devfreq.h>
> > > > +#include <linux/firmware/qcom/qcom_scm.h>
> > > > #include <linux/pm_domain.h>
> > > > #include <linux/soc/qcom/llcc-qcom.h>
> > > >
> > > > @@ -1686,7 +1687,8 @@ static int a6xx_zap_shader_init(struct msm_gpu *gpu)
> > > > A6XX_RBBM_INT_0_MASK_RBBM_HANG_DETECT | \
> > > > A6XX_RBBM_INT_0_MASK_UCHE_OOB_ACCESS | \
> > > > A6XX_RBBM_INT_0_MASK_UCHE_TRAP_INTR | \
> > > > - A6XX_RBBM_INT_0_MASK_TSBWRITEERROR)
> > > > + A6XX_RBBM_INT_0_MASK_TSBWRITEERROR | \
> > > > + A6XX_RBBM_INT_0_MASK_SWFUSEVIOLATION)
> > > >
> > > > #define A7XX_APRIV_MASK (A6XX_CP_APRIV_CNTL_ICACHE | \
> > > > A6XX_CP_APRIV_CNTL_RBFETCH | \
> > > > @@ -2356,6 +2358,26 @@ static void a6xx_fault_detect_irq(struct msm_gpu *gpu)
> > > > kthread_queue_work(gpu->worker, &gpu->recover_work);
> > > > }
> > > >
> > > > +static void a7xx_sw_fuse_violation_irq(struct msm_gpu *gpu)
> > > > +{
> > > > + u32 status;
> > > > +
> > > > + status = gpu_read(gpu, REG_A7XX_RBBM_SW_FUSE_INT_STATUS);
> > > > + gpu_write(gpu, REG_A7XX_RBBM_SW_FUSE_INT_MASK, 0);
> > > > +
> > > > + dev_err_ratelimited(&gpu->pdev->dev, "SW fuse violation status=%8.8x\n", status);
> > > > +
> > > > + /* Ignore FASTBLEND violations, because the HW will silently fall back
> > > > + * to legacy blending.
> > > > + */
> > > > + if (status & (A7XX_CX_MISC_SW_FUSE_VALUE_RAYTRACING |
> > > > + A7XX_CX_MISC_SW_FUSE_VALUE_LPAC)) {
> > > > + del_timer(&gpu->hangcheck_timer);
> > > > +
> > > > + kthread_queue_work(gpu->worker, &gpu->recover_work);
> > > > + }
> > > > +}
> > > > +
> > > > static irqreturn_t a6xx_irq(struct msm_gpu *gpu)
> > > > {
> > > > struct msm_drm_private *priv = gpu->dev->dev_private;
> > > > @@ -2384,6 +2406,9 @@ static irqreturn_t a6xx_irq(struct msm_gpu *gpu)
> > > > if (status & A6XX_RBBM_INT_0_MASK_UCHE_OOB_ACCESS)
> > > > dev_err_ratelimited(&gpu->pdev->dev, "UCHE | Out of bounds access\n");
> > > >
> > > > + if (status & A6XX_RBBM_INT_0_MASK_SWFUSEVIOLATION)
> > > > + a7xx_sw_fuse_violation_irq(gpu);
> > > > +
> > > > if (status & A6XX_RBBM_INT_0_MASK_CP_CACHE_FLUSH_TS)
> > > > msm_gpu_retire(gpu);
> > > >
> > > > @@ -2525,6 +2550,60 @@ static void a6xx_llc_slices_init(struct platform_device *pdev,
> > > > a6xx_gpu->llc_mmio = ERR_PTR(-EINVAL);
> > > > }
> > > >
> > > > +static int a7xx_cx_mem_init(struct a6xx_gpu *a6xx_gpu)
> > > > +{
> > > > + struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
> > > > + struct msm_gpu *gpu = &adreno_gpu->base;
> > > > + u32 gpu_req = QCOM_SCM_GPU_ALWAYS_EN_REQ;
> > > > + u32 fuse_val;
> > > > + int ret;
> > > > +
> > > > + if (adreno_is_a740(adreno_gpu)) {
> > > > + /* Raytracing is always enabled on a740 */
> > > > + adreno_gpu->has_ray_tracing = true;
> > > > + }
> > > > +
> > > > + if (!qcom_scm_is_available()) {
> > > > + /* Assume that if qcom scm isn't available, that whatever
> > > > + * replacement allows writing the fuse register ourselves.
> > > > + * Users of alternative firmware need to make sure this
> > > > + * register is writeable or indicate that it's not somehow.
> > > > + * Print a warning because if you mess this up you're about to
> > > > + * crash horribly.
> > > > + */
> > > > + if (adreno_is_a750(adreno_gpu)) {
> > > > + dev_warn_once(gpu->dev->dev,
> > > > + "SCM is not available, poking fuse register\n");
> > > > + a6xx_llc_write(a6xx_gpu, REG_A7XX_CX_MISC_SW_FUSE_VALUE,
> > > > + A7XX_CX_MISC_SW_FUSE_VALUE_RAYTRACING |
> > > > + A7XX_CX_MISC_SW_FUSE_VALUE_FASTBLEND |
> > > > + A7XX_CX_MISC_SW_FUSE_VALUE_LPAC);
> > > > + adreno_gpu->has_ray_tracing = true;
> > > > + }
> > > > +
> > > > + return 0;
> > > > + }
> > > > +
> > > > + if (adreno_is_a750(adreno_gpu))
> > >
> > > Most of the function is under the if (adreno_is_a750) conditions. Can
> > > we invert the logic and add a single block of if(adreno_is_a750) and
> > > then place all the code underneath?
> >
> > You mean to duplicate the qcom_scm_is_available check and qcom_scm_
> >
> > >
> > > > + gpu_req |= QCOM_SCM_GPU_TSENSE_EN_REQ;
> > > > +
> > > > + ret = qcom_scm_gpu_init_regs(gpu_req);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + /* On a750 raytracing may be disabled by the firmware, find out whether
> > > > + * that's the case. The scm call above sets the fuse register.
> > > > + */
> > > > + if (adreno_is_a750(adreno_gpu)) {
> > > > + fuse_val = a6xx_llc_read(a6xx_gpu, REG_A7XX_CX_MISC_SW_FUSE_VALUE);
> > >
> > > This register isn't accessible with the current sm8650.dtsi. Since DT
> > > and driver are going through different trees, please add safety guards
> > > here, so that the driver doesn't crash if used with older dtsi
> >
> > I don't see how this is an issue. msm-next is currently based on 6.9,
> > which doesn't have the GPU defined in sm8650.dtsi. AFAIK patches 1 and
> > 2 will have to go through the linux-arm-msm tree, which will have to
> > be merged into msm-next before this patch lands there, so there will
> > never be any breakage.
>
> linux-arm-msm isn't going to be merged into msm-next. If we do not ask
> for ack for the fix to go through msm-next, they will get these
> patches in parallel.
I'm not familiar with how complicated cross-tree changes like this get
merged, but why would we merge these in parallel given that this patch
depends on the previous patch that introduces
qcom_scm_gpu_init_regs(), and that would (I assume?) normally go
through the same tree as patch 1? Even if patch 1 gets merged in
parallel in linux-arm-msm, in what scenario would we have a broken
boot? You won't have a devicetree with a working sm8650 GPU and
drm/msm with raytracing until linux-arm-msm is merged into msm-next at
which point patch 1 will have landed somehow.
>
> Another option is to get dtsi fix into 6.9 and delay the raytracing
> until 6.10-rc which doesn't make a lot of sense from my POV).
>
> >
> > > (not to mention that dts is considered to be an ABI and newer kernels
> > > are supposed not to break with older DT files).
> >
> > That policy only applies to released kernels, so that's irrelevant here.
>
> It applies to all kernels, the reason being pretty simple: git-bisect
> should not be broken.
As I wrote above, this is not an issue. The point I was making is that
mixing and matching dtb's from one unmerged subsystem tree and a
kernel from another isn't supported AFAIK, and that's the only
scenario where this could break.
Connor
