Re: [PATCH v7 0/6] soc: qcom: add in-kernel pd-mapper implementation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 25 Apr 2024 at 10:08, Steev Klimaszewski <steev@xxxxxxxx> wrote:
>
> Hi Dmitry,
>
> On Wed, Apr 24, 2024 at 4:28 AM Dmitry Baryshkov
> <dmitry.baryshkov@xxxxxxxxxx> wrote:
> >
> > Protection domain mapper is a QMI service providing mapping between
> > 'protection domains' and services supported / allowed in these domains.
> > For example such mapping is required for loading of the WiFi firmware or
> > for properly starting up the UCSI / altmode / battery manager support.
> >
> > The existing userspace implementation has several issue. It doesn't play
> > well with CONFIG_EXTRA_FIRMWARE, it doesn't reread the JSON files if the
> > firmware location is changed (or if the firmware was not available at
> > the time pd-mapper was started but the corresponding directory is
> > mounted later), etc.
> >
> > However this configuration is largely static and common between
> > different platforms. Provide in-kernel service implementing static
> > per-platform data.
> >
> > Unlike previous revisions of the patchset, this iteration uses static
> > configuration per platform, rather than building it dynamically from the
> > list of DSPs being started.
> >
> > To: Bjorn Andersson <andersson@xxxxxxxxxx>
> > To: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> > To: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
> > To: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> > Cc: linux-arm-msm@xxxxxxxxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Cc: linux-remoteproc@xxxxxxxxxxxxxxx
> > Cc: Johan Hovold <johan+linaro@xxxxxxxxxx>
> > Cc: Xilin Wu <wuxilin123@xxxxxxxxx>
> > Cc: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
> > --
> >
> > Changes in v7:
> > - Fixed modular build (Steev)
> > - Link to v6: https://lore.kernel.org/r/20240422-qcom-pd-mapper-v6-0-f96957d01207@xxxxxxxxxx
> >
> > Changes in v6:
> > - Reworked mutex to fix lockdep issue on deregistration
> > - Fixed dependencies between PD-mapper and remoteproc to fix modular
> >   builds (Krzysztof)
> > - Added EXPORT_SYMBOL_GPL to fix modular builds (Krzysztof)
> > - Fixed kerneldocs (Krzysztof)
> > - Removed extra pr_debug messages (Krzysztof)
> > - Fixed wcss build (Krzysztof)
> > - Added platforms which do not require protection domain mapping to
> >   silence the notice on those platforms
> > - Link to v5: https://lore.kernel.org/r/20240419-qcom-pd-mapper-v5-0-e35b6f847e99@xxxxxxxxxx
> >
> > Changes in v5:
> > - pdr: drop lock in pdr_register_listener, list_lock is already held (Chris Lew)
> > - pd_mapper: reworked to provide static configuration per platform
> >   (Bjorn)
> > - Link to v4: https://lore.kernel.org/r/20240311-qcom-pd-mapper-v4-0-24679cca5c24@xxxxxxxxxx
> >
> > Changes in v4:
> > - Fixed missing chunk, reenabled kfree in qmi_del_server (Konrad)
> > - Added configuration for sm6350 (Thanks to Luca)
> > - Removed RFC tag (Konrad)
> > - Link to v3: https://lore.kernel.org/r/20240304-qcom-pd-mapper-v3-0-6858fa1ac1c8@xxxxxxxxxx
> >
> > Changes in RFC v3:
> > - Send start / stop notifications when PD-mapper domain list is changed
> > - Reworked the way PD-mapper treats protection domains, register all of
> >   them in a single batch
> > - Added SC7180 domains configuration based on TCL Book 14 GO
> > - Link to v2: https://lore.kernel.org/r/20240301-qcom-pd-mapper-v2-0-5d12a081d9d1@xxxxxxxxxx
> >
> > Changes in RFC v2:
> > - Swapped num_domains / domains (Konrad)
> > - Fixed an issue with battery not working on sc8280xp
> > - Added missing configuration for QCS404
> >
> > ---
> > Dmitry Baryshkov (6):
> >       soc: qcom: pdr: protect locator_addr with the main mutex
> >       soc: qcom: pdr: fix parsing of domains lists
> >       soc: qcom: pdr: extract PDR message marshalling data
> >       soc: qcom: qmi: add a way to remove running service
> >       soc: qcom: add pd-mapper implementation
> >       remoteproc: qcom: enable in-kernel PD mapper
> >
> >  drivers/remoteproc/Kconfig          |   4 +
> >  drivers/remoteproc/qcom_q6v5_adsp.c |  11 +-
> >  drivers/remoteproc/qcom_q6v5_mss.c  |  10 +-
> >  drivers/remoteproc/qcom_q6v5_pas.c  |  12 +-
> >  drivers/remoteproc/qcom_q6v5_wcss.c |  12 +-
> >  drivers/soc/qcom/Kconfig            |  14 +
> >  drivers/soc/qcom/Makefile           |   2 +
> >  drivers/soc/qcom/pdr_interface.c    |   6 +-
> >  drivers/soc/qcom/pdr_internal.h     | 318 ++---------------
> >  drivers/soc/qcom/qcom_pd_mapper.c   | 656 ++++++++++++++++++++++++++++++++++++
> >  drivers/soc/qcom/qcom_pdr_msg.c     | 353 +++++++++++++++++++
> >  drivers/soc/qcom/qmi_interface.c    |  67 ++++
> >  include/linux/soc/qcom/pd_mapper.h  |  28 ++
> >  include/linux/soc/qcom/qmi.h        |   2 +
> >  14 files changed, 1193 insertions(+), 302 deletions(-)
> > ---
> > base-commit: a59668a9397e7245b26e9be85d23f242ff757ae8
> > change-id: 20240301-qcom-pd-mapper-e12d622d4ad0
> >
> > Best regards,
> > --
> > Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> >
> >
> I've tested this series over a large number of reboots, and the p-d
> devices(?) do always seem to come up (with the pd-mapper service
> disabled) on my Thinkpad X13s.  One less service to run in userland!
> Tested-by: Steev Klimaszewski <steev@xxxxxxxx>

Thank you!

-- 
With best wishes
Dmitry





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux