The DT support in hidma has been broken since commit 37fa4905d22a
("dmaengine: qcom_hidma: simplify DT resource parsing") in 2018. The
issue is the of_address_to_resource() calls bail out on success rather
than failure. This driver is for a defunct QCom server platform where
DT use was limited to start with. As it seems no one has noticed the
breakage, just remove the DT support altogether.
Reported-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Signed-off-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
---
drivers/dma/qcom/hidma.c | 11 ----
drivers/dma/qcom/hidma_mgmt.c | 109 +---------------------------------
2 files changed, 1 insertion(+), 119 deletions(-)
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 202ac95227cb..721b4ac0857a 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -50,7 +50,6 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <linux/of_dma.h>
#include <linux/property.h>
#include <linux/delay.h>
#include <linux/acpi.h>
@@ -947,22 +946,12 @@ static const struct acpi_device_id hidma_acpi_ids[] = {
MODULE_DEVICE_TABLE(acpi, hidma_acpi_ids);
#endif
-static const struct of_device_id hidma_match[] = {
- {.compatible = "qcom,hidma-1.0",},
- {.compatible = "qcom,hidma-1.1", .data = (void *)(HIDMA_MSI_CAP),},
- {.compatible = "qcom,hidma-1.2",
- .data = (void *)(HIDMA_MSI_CAP | HIDMA_IDENTITY_CAP),},
- {},
-};
-MODULE_DEVICE_TABLE(of, hidma_match);
-
static struct platform_driver hidma_driver = {
.probe = hidma_probe,
.remove_new = hidma_remove,
.shutdown = hidma_shutdown,
.driver = {
.name = "hidma",
- .of_match_table = hidma_match,
.acpi_match_table = ACPI_PTR(hidma_acpi_ids),
},
};
diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
index 1d675f31252b..bb883e138ebf 100644
--- a/drivers/dma/qcom/hidma_mgmt.c
+++ b/drivers/dma/qcom/hidma_mgmt.c
@@ -7,12 +7,7 @@
#include <linux/dmaengine.h>
#include <linux/acpi.h>
-#include <linux/of.h>
#include <linux/property.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/uaccess.h>
@@ -327,115 +322,13 @@ static const struct acpi_device_id hidma_mgmt_acpi_ids[] = {
MODULE_DEVICE_TABLE(acpi, hidma_mgmt_acpi_ids);
#endif
-static const struct of_device_id hidma_mgmt_match[] = {
- {.compatible = "qcom,hidma-mgmt-1.0",},
- {},
-};
-MODULE_DEVICE_TABLE(of, hidma_mgmt_match);
-
static struct platform_driver hidma_mgmt_driver = {
.probe = hidma_mgmt_probe,
.driver = {
.name = "hidma-mgmt",
- .of_match_table = hidma_mgmt_match,
.acpi_match_table = ACPI_PTR(hidma_mgmt_acpi_ids),
},
};
-#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
-static int object_counter;
-
-static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
-{
- struct platform_device *pdev_parent = of_find_device_by_node(np);
- struct platform_device_info pdevinfo;
- struct device_node *child;
- struct resource *res;
- int ret = 0;
-
- /* allocate a resource array */
- res = kcalloc(3, sizeof(*res), GFP_KERNEL);
- if (!res)
- return -ENOMEM;
-
- for_each_available_child_of_node(np, child) {
- struct platform_device *new_pdev;
-
- ret = of_address_to_resource(child, 0, &res[0]);
- if (!ret)
- goto out;
-
- ret = of_address_to_resource(child, 1, &res[1]);
- if (!ret)
- goto out;
-
- ret = of_irq_to_resource(child, 0, &res[2]);
- if (ret <= 0)
- goto out;
-
- memset(&pdevinfo, 0, sizeof(pdevinfo));
- pdevinfo.fwnode = &child->fwnode;
- pdevinfo.parent = pdev_parent ? &pdev_parent->dev : NULL;
- pdevinfo.name = child->name;
- pdevinfo.id = object_counter++;
- pdevinfo.res = res;
- pdevinfo.num_res = 3;
- pdevinfo.data = NULL;
- pdevinfo.size_data = 0;
- pdevinfo.dma_mask = DMA_BIT_MASK(64);
- new_pdev = platform_device_register_full(&pdevinfo);
- if (IS_ERR(new_pdev)) {
- ret = PTR_ERR(new_pdev);
- goto out;
- }
- new_pdev->dev.of_node = child;
- of_dma_configure(&new_pdev->dev, child, true);
- /*
- * It is assumed that calling of_msi_configure is safe on
- * platforms with or without MSI support.
- */
- of_msi_configure(&new_pdev->dev, child);
- }
-
- kfree(res);
-
- return ret;
-
-out:
- of_node_put(child);
- kfree(res);
-
- return ret;
-}
-#endif
-
-static int __init hidma_mgmt_init(void)
-{
-#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
- struct device_node *child;
-
- for_each_matching_node(child, hidma_mgmt_match) {
- /* device tree based firmware here */
- hidma_mgmt_of_populate_channels(child);
- }
-#endif
- /*
- * We do not check for return value here, as it is assumed that
- * platform_driver_register must not fail. The reason for this is that
- * the (potential) hidma_mgmt_of_populate_channels calls above are not
- * cleaned up if it does fail, and to do this work is quite
- * complicated. In particular, various calls of of_address_to_resource,
- * of_irq_to_resource, platform_device_register_full, of_dma_configure,
- * and of_msi_configure which then call other functions and so on, must
- * be cleaned up - this is not a trivial exercise.
- *
- * Currently, this module is not intended to be unloaded, and there is
- * no module_exit function defined which does the needed cleanup. For
- * this reason, we have to assume success here.
- */
- platform_driver_register(&hidma_mgmt_driver);
-
- return 0;
-}
-module_init(hidma_mgmt_init);
+module_platform_driver(hidma_mgmt_driver);
MODULE_LICENSE("GPL v2");
--
2.43.0
