[PATCH v4 1/3] bus: mhi: host: Add sysfs entry to force device to enter EDL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add sysfs entry to allow users of MHI bus force device to enter EDL.
Considering that the way to enter EDL mode varies from device to device and
some devices even do not support EDL. Hence, add a callback edl_trigger in
mhi controller as part of the sysfs entry to be invoked and MHI core will
only create EDL sysfs entry for mhi controller that provides edl_trigger
callback. All of the process a specific device required to enter EDL mode
can be placed in this callback.

Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
---
 Documentation/ABI/stable/sysfs-bus-mhi | 13 +++++++++++++
 drivers/bus/mhi/host/init.c            | 33 +++++++++++++++++++++++++++++++++
 include/linux/mhi.h                    |  2 ++
 3 files changed, 48 insertions(+)

diff --git a/Documentation/ABI/stable/sysfs-bus-mhi b/Documentation/ABI/stable/sysfs-bus-mhi
index 1a47f9e..b44f467 100644
--- a/Documentation/ABI/stable/sysfs-bus-mhi
+++ b/Documentation/ABI/stable/sysfs-bus-mhi
@@ -29,3 +29,16 @@ Description:	Initiates a SoC reset on the MHI controller.  A SoC reset is
                 This can be useful as a method of recovery if the device is
                 non-responsive, or as a means of loading new firmware as a
                 system administration task.
+
+What:           /sys/bus/mhi/devices/.../trigger_edl
+Date:           April 2024
+KernelVersion:  6.9
+Contact:        mhi@xxxxxxxxxxxxxxx
+Description:    Writing a non-zero value to this file will force devices to
+                enter EDL (Emergency Download) mode. This entry only exists for
+                devices capable of entering the EDL mode using the standard EDL
+                triggering mechanism defined in the MHI spec v1.2. Once in EDL
+                mode, the flash programmer image can be downloaded to the
+                device to enter the flash programmer execution environment.
+                This can be useful if user wants to use QDL (Qualcomm Download,
+                which is used to download firmware over EDL) to update firmware.
diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c
index 44f9349..7104c18 100644
--- a/drivers/bus/mhi/host/init.c
+++ b/drivers/bus/mhi/host/init.c
@@ -127,6 +127,30 @@ static ssize_t soc_reset_store(struct device *dev,
 }
 static DEVICE_ATTR_WO(soc_reset);
 
+static ssize_t trigger_edl_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct mhi_device *mhi_dev = to_mhi_device(dev);
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret < 0)
+		return ret;
+
+	if (!val)
+		return -EINVAL;
+
+	ret = mhi_cntrl->edl_trigger(mhi_cntrl);
+	if (ret)
+		return ret;
+
+	return count;
+}
+static DEVICE_ATTR_WO(trigger_edl);
+
 static struct attribute *mhi_dev_attrs[] = {
 	&dev_attr_serial_number.attr,
 	&dev_attr_oem_pk_hash.attr,
@@ -1018,6 +1042,12 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
 	if (ret)
 		goto err_release_dev;
 
+	if (mhi_cntrl->edl_trigger) {
+		ret = sysfs_create_file(&mhi_dev->dev.kobj, &dev_attr_trigger_edl.attr);
+		if (ret)
+			goto err_release_dev;
+	}
+
 	mhi_cntrl->mhi_dev = mhi_dev;
 
 	mhi_create_debugfs(mhi_cntrl);
@@ -1051,6 +1081,9 @@ void mhi_unregister_controller(struct mhi_controller *mhi_cntrl)
 	mhi_deinit_free_irq(mhi_cntrl);
 	mhi_destroy_debugfs(mhi_cntrl);
 
+	if (mhi_cntrl->edl_trigger)
+		sysfs_remove_file(&mhi_dev->dev.kobj, &dev_attr_trigger_edl.attr);
+
 	destroy_workqueue(mhi_cntrl->hiprio_wq);
 	kfree(mhi_cntrl->mhi_cmd);
 	kfree(mhi_cntrl->mhi_event);
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index cde01e1..d968e1a 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -353,6 +353,7 @@ struct mhi_controller_config {
  * @read_reg: Read a MHI register via the physical link (required)
  * @write_reg: Write a MHI register via the physical link (required)
  * @reset: Controller specific reset function (optional)
+ * @edl_trigger: CB function to trigger EDL mode (optional)
  * @buffer_len: Bounce buffer length
  * @index: Index of the MHI controller instance
  * @bounce_buf: Use of bounce buffer
@@ -435,6 +436,7 @@ struct mhi_controller {
 	void (*write_reg)(struct mhi_controller *mhi_cntrl, void __iomem *addr,
 			  u32 val);
 	void (*reset)(struct mhi_controller *mhi_cntrl);
+	int (*edl_trigger)(struct mhi_controller *mhi_cntrl);
 
 	size_t buffer_len;
 	int index;
-- 
2.7.4





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux