On Mon, 22 Apr 2024 10:33:10 +0200, Neil Armstrong wrote: > The PCIe Gen4x2 PHY found in the SM8[456]50 SoCs have a second clock named > "PHY_AUX_CLK" which is an input of the Global Clock Controller (GCC) which > is muxed & gated then returned to the PHY as an input. > > Document the clock IDs to select the PIPE clock or the AUX clock, > also enforce a second clock-output-names and a #clock-cells value of 1 > for the PCIe Gen4x2 PHY found in the SM8[456]50 SoCs. > > The PHY driver needs a light refactoring to support a second clock, > and finally the DT is changed to connect the PHY second clock to the > corresponding GCC input then drop the dummy fixed rate clock. > > Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> > --- > Changes in v3: > - Rebased on linux-next, applies now cleanly > - Link to v2: https://lore.kernel.org/r/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-0-3ec0a966d52f@xxxxxxxxxx > > Changes in v2: > - Collected review tags > - Switched back to of_clk_add_hw_provider/devm_add_action_or_reset to maintain compatibility > - Tried to use generic of_clk_hw_onecell_get() but it requires to much boilerplate code > and would still need a local qmp_pcie_clk_hw_get() to support the current #clock-cells=0 > when exposing 2 clocks, so it's simpler to just return the clocks in qmp_pcie_clk_hw_get() > - Link to v1: https://lore.kernel.org/r/20240319-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v1-0-926d7a4ccd80@xxxxxxxxxx > > --- > Neil Armstrong (3): > arm64: dts: qcom: sm8450: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk > arm64: dts: qcom: sm8550: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk > arm64: dts: qcom: sm8650: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk > > arch/arm64/boot/dts/qcom/sm8450.dtsi | 8 ++++---- > arch/arm64/boot/dts/qcom/sm8550-hdk.dts | 4 ---- > arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 4 ---- > arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 8 -------- > arch/arm64/boot/dts/qcom/sm8550.dtsi | 13 ++++--------- > arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 4 ---- > arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 4 ---- > arch/arm64/boot/dts/qcom/sm8650.dtsi | 13 ++++--------- > 8 files changed, 12 insertions(+), 46 deletions(-) > --- > base-commit: f529a6d274b3b8c75899e949649d231298f30a32 > change-id: 20240319-topic-sm8x50-upstream-pcie-1-phy-aux-clk-4b35169707dd > > Best regards, > -- > Neil Armstrong <neil.armstrong@xxxxxxxxxx> > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y qcom/sm8550-hdk.dtb qcom/sm8550-mtp.dtb qcom/sm8550-qrd.dtb qcom/sm8650-mtp.dtb qcom/sm8650-qrd.dtb' for 20240422-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v3-0-799475a27cce@xxxxxxxxxx: arch/arm64/boot/dts/qcom/sm8550-qrd.dtb: clock-controller@100000: clocks: [[41], [42], [43], [44, 0], [45, 0], [45, 1], [45, 2], [46, 0]] is too short from schema $id: http://devicetree.org/schemas/clock/qcom,sm8550-gcc.yaml# arch/arm64/boot/dts/qcom/sm8550-qrd.dtb: clock-controller@100000: Unevaluated properties are not allowed ('clocks' was unexpected) from schema $id: http://devicetree.org/schemas/clock/qcom,sm8550-gcc.yaml#
