[PATCH v21 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On multiport supported controllers, each port has its own DP/DM and
SuperSpeed (if super speed capable) interrupts. As per the bindings,
their interrupt names differ from single-port ones by having a "_x"
added as suffix (x being the port number). Identify from the interrupt
names whether the controller is a multiport controller or not.
Refactor dwc3_qcom_setup_irq() call to parse multiportinterrupts along
with non-multiport ones accordingly.

Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-qcom.c | 140 ++++++++++++++++++++++++++---------
 1 file changed, 106 insertions(+), 34 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index cae5dab8fcfc..5ddb694dd8e7 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -52,6 +52,16 @@
 #define APPS_USB_AVG_BW 0
 #define APPS_USB_PEAK_BW MBps_to_icc(40)
 
+/* Qualcomm SoCs with multiport support has up to 4 ports */
+#define DWC3_QCOM_MAX_PORTS	4
+
+struct dwc3_qcom_port {
+	int			qusb2_phy_irq;
+	int			dp_hs_phy_irq;
+	int			dm_hs_phy_irq;
+	int			ss_phy_irq;
+};
+
 struct dwc3_qcom {
 	struct device		*dev;
 	void __iomem		*qscratch_base;
@@ -59,11 +69,8 @@ struct dwc3_qcom {
 	struct clk		**clks;
 	int			num_clocks;
 	struct reset_control	*resets;
-
-	int			qusb2_phy_irq;
-	int			dp_hs_phy_irq;
-	int			dm_hs_phy_irq;
-	int			ss_phy_irq;
+	struct dwc3_qcom_port	ports[DWC3_QCOM_MAX_PORTS];
+	u8			num_ports;
 	enum usb_device_speed	usb2_speed;
 
 	struct extcon_dev	*edev;
@@ -354,24 +361,24 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
 
 static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
 {
-	dwc3_qcom_disable_wakeup_irq(qcom->qusb2_phy_irq);
+	dwc3_qcom_disable_wakeup_irq(qcom->ports[0].qusb2_phy_irq);
 
 	if (qcom->usb2_speed == USB_SPEED_LOW) {
-		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+		dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
 	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
 			(qcom->usb2_speed == USB_SPEED_FULL)) {
-		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+		dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
 	} else {
-		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
-		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+		dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
+		dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
 	}
 
-	dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
+	dwc3_qcom_disable_wakeup_irq(qcom->ports[0].ss_phy_irq);
 }
 
 static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
 {
-	dwc3_qcom_enable_wakeup_irq(qcom->qusb2_phy_irq, 0);
+	dwc3_qcom_enable_wakeup_irq(qcom->ports[0].qusb2_phy_irq, 0);
 
 	/*
 	 * Configure DP/DM line interrupts based on the USB2 device attached to
@@ -383,20 +390,20 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
 	 */
 
 	if (qcom->usb2_speed == USB_SPEED_LOW) {
-		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
-						IRQ_TYPE_EDGE_FALLING);
+		dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
+					    IRQ_TYPE_EDGE_FALLING);
 	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
 			(qcom->usb2_speed == USB_SPEED_FULL)) {
-		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
-						IRQ_TYPE_EDGE_FALLING);
+		dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
+					    IRQ_TYPE_EDGE_FALLING);
 	} else {
-		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
-						IRQ_TYPE_EDGE_RISING);
-		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
-						IRQ_TYPE_EDGE_RISING);
+		dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
+					    IRQ_TYPE_EDGE_RISING);
+		dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
+					    IRQ_TYPE_EDGE_RISING);
 	}
 
-	dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq, 0);
+	dwc3_qcom_enable_wakeup_irq(qcom->ports[0].ss_phy_irq, 0);
 }
 
 static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
@@ -517,42 +524,107 @@ static int dwc3_qcom_request_irq(struct dwc3_qcom *qcom, int irq,
 	return ret;
 }
 
-static int dwc3_qcom_setup_irq(struct platform_device *pdev)
+static int dwc3_qcom_setup_port_irq(struct platform_device *pdev, int port_index, bool is_multiport)
 {
 	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+	const char *irq_name;
 	int irq;
 	int ret;
 
-	irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
+	if (is_multiport)
+		irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_%d", port_index + 1);
+	else
+		irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_irq");
+	if (!irq_name)
+		return -ENOMEM;
+
+	irq = platform_get_irq_byname_optional(pdev, irq_name);
 	if (irq > 0) {
-		ret = dwc3_qcom_request_irq(qcom, irq, "qusb2_phy");
+		ret = dwc3_qcom_request_irq(qcom, irq, irq_name);
 		if (ret)
 			return ret;
-		qcom->qusb2_phy_irq = irq;
+		qcom->ports[port_index].dp_hs_phy_irq = irq;
 	}
 
-	irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
+	if (is_multiport)
+		irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dm_hs_phy_%d", port_index + 1);
+	else
+		irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dm_hs_phy_irq");
+	if (!irq_name)
+		return -ENOMEM;
+
+	irq = platform_get_irq_byname_optional(pdev, irq_name);
 	if (irq > 0) {
-		ret = dwc3_qcom_request_irq(qcom, irq, "dp_hs_phy_irq");
+		ret = dwc3_qcom_request_irq(qcom, irq, irq_name);
 		if (ret)
 			return ret;
-		qcom->dp_hs_phy_irq = irq;
+		qcom->ports[port_index].dm_hs_phy_irq = irq;
 	}
 
-	irq = platform_get_irq_byname_optional(pdev, "dm_hs_phy_irq");
+	if (is_multiport)
+		irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "ss_phy_%d", port_index + 1);
+	else
+		irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "ss_phy_irq");
+	if (!irq_name)
+		return -ENOMEM;
+
+	irq = platform_get_irq_byname_optional(pdev, irq_name);
 	if (irq > 0) {
-		ret = dwc3_qcom_request_irq(qcom, irq, "dm_hs_phy_irq");
+		ret = dwc3_qcom_request_irq(qcom, irq, irq_name);
 		if (ret)
 			return ret;
-		qcom->dm_hs_phy_irq = irq;
+		qcom->ports[port_index].ss_phy_irq = irq;
 	}
 
-	irq = platform_get_irq_byname_optional(pdev, "ss_phy_irq");
+	if (is_multiport)
+		return 0;
+
+	irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
 	if (irq > 0) {
-		ret = dwc3_qcom_request_irq(qcom, irq, "ss_phy_irq");
+		ret = dwc3_qcom_request_irq(qcom, irq, "qusb2_phy");
+		if (ret)
+			return ret;
+		qcom->ports[port_index].qusb2_phy_irq = irq;
+	}
+
+	return 0;
+}
+
+static int dwc3_qcom_find_num_ports(struct platform_device *pdev)
+{
+	char irq_name[14];
+	int port_num;
+	int irq;
+
+	irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_1");
+	if (irq <= 0)
+		return 1;
+
+	for (port_num = 2; port_num <= DWC3_QCOM_MAX_PORTS; port_num++) {
+		sprintf(irq_name, "dp_hs_phy_%d", port_num);
+
+		irq = platform_get_irq_byname_optional(pdev, irq_name);
+		if (irq <= 0)
+			return port_num - 1;
+	}
+
+	return DWC3_QCOM_MAX_PORTS;
+}
+
+static int dwc3_qcom_setup_irq(struct platform_device *pdev)
+{
+	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+	bool is_multiport;
+	int ret;
+	int i;
+
+	qcom->num_ports = dwc3_qcom_find_num_ports(pdev);
+	is_multiport = (qcom->num_ports > 1);
+
+	for (i = 0; i < qcom->num_ports; i++) {
+		ret = dwc3_qcom_setup_port_irq(pdev, i, is_multiport);
 		if (ret)
 			return ret;
-		qcom->ss_phy_irq = irq;
 	}
 
 	return 0;
-- 
2.34.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux