Add the speedbin masks to ensure only the desired OPPs are available on chips of a given bin. Using this, add the binned 719 MHz OPP and the non-binned 124.8 MHz. Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8550.dtsi | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 5cae8d773cec..2f6842f6a5b7 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -2087,48 +2087,67 @@ zap-shader { memory-region = <&gpu_micro_code_mem>; }; - /* Speedbin needs more work on A740+, keep only lower freqs */ gpu_opp_table: opp-table { compatible = "operating-points-v2"; + opp-719000000 { + opp-hz = /bits/ 64 <719000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-supported-hw = <0x1>; + }; + opp-680000000 { opp-hz = /bits/ 64 <680000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-supported-hw = <0x3>; }; opp-615000000 { opp-hz = /bits/ 64 <615000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + opp-supported-hw = <0x3>; }; opp-550000000 { opp-hz = /bits/ 64 <550000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-supported-hw = <0x3>; }; opp-475000000 { opp-hz = /bits/ 64 <475000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + opp-supported-hw = <0x3>; }; opp-401000000 { opp-hz = /bits/ 64 <401000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-supported-hw = <0x3>; }; opp-348000000 { opp-hz = /bits/ 64 <348000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + opp-supported-hw = <0x3>; }; opp-295000000 { opp-hz = /bits/ 64 <295000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + opp-supported-hw = <0x3>; }; opp-220000000 { opp-hz = /bits/ 64 <220000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + opp-supported-hw = <0x3>; + }; + + opp-124800000 { + opp-hz = /bits/ 64 <124800000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + opp-supported-hw = <0x3>; }; }; }; -- 2.44.0