Re: [PATCH v1 1/1] soundwire: qcom: disable stop clock on 1.3.0 and below

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 13/04/2024 07:42, Anton Bambura wrote:
This patch returns back the behavior of disabling stop clock on soundwire
1.3.0 and below which seems to have been altered by accident which
results in broken audio on sdm845 + wcd9340. For example, on AYN Odin and
Lenovo Yoga C630 devices.

Fixes: 4830bfa2c812 ("soundwire: qcom: set clk stop need reset flag at runtime")
Signed-off-by: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
---
  drivers/soundwire/qcom.c | 3 +++
  1 file changed, 3 insertions(+)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index a1e2d6c98186..bc03484a28e8 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -628,6 +628,9 @@ static int qcom_swrm_enumerate(struct sdw_bus *bus)
  			}
  		}
+ if (ctrl->version <= SWRM_VERSION_1_3_0)
+			ctrl->clock_stop_not_supported = true;
+

This is not the right fix, this can be determined from codec clk_stop_mode1 flag.

can you try this patch:

----------------------------->cut<-----------------------------
From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Date: Wed, 17 Apr 2024 12:38:49 +0100
Subject: [PATCH] ASoC: codecs: wsa881x: set clk_stop_mode1 flag

WSA881x codecs do not retain the state while clock is stopped, so mark
this with clk_stop_mode1 flag.

Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
 sound/soc/codecs/wsa881x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c
index 3c025dabaf7a..1253695bebd8 100644
--- a/sound/soc/codecs/wsa881x.c
+++ b/sound/soc/codecs/wsa881x.c
@@ -1155,6 +1155,7 @@ static int wsa881x_probe(struct sdw_slave *pdev,
 	pdev->prop.sink_ports = GENMASK(WSA881X_MAX_SWR_PORTS, 0);
 	pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;
 	pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
+	pdev->prop.clk_stop_mode1 = true;
 	gpiod_direction_output(wsa881x->sd_n, !wsa881x->sd_n_val);

 	wsa881x->regmap = devm_regmap_init_sdw(pdev, &wsa881x_regmap_config);
--
2.21.0
----------------------------->cut<-----------------------------


thanks,
Srini

  		if (!found) {
  			qcom_swrm_set_slave_dev_num(bus, NULL, i);
  			sdw_slave_add(bus, &id, NULL);




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux