[PATCH 5/8] usb: typec: ucsi: glink: simplify notification handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



All platforms except Qualcomm SC8180X pass CCI in the notification
message. Use it instead of going back and forth over RPMSG
interface to read CCI.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/usb/typec/ucsi/ucsi_glink.c | 90 +++++++++++++++++++++++++++++--------
 1 file changed, 71 insertions(+), 19 deletions(-)

diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
index d029cc9d82e3..40fcda055b05 100644
--- a/drivers/usb/typec/ucsi/ucsi_glink.c
+++ b/drivers/usb/typec/ucsi/ucsi_glink.c
@@ -6,6 +6,7 @@
 #include <linux/auxiliary_bus.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/property.h>
 #include <linux/soc/qcom/pdr.h>
@@ -70,7 +71,7 @@ struct pmic_glink_ucsi {
 
 	int sync_val;
 
-	struct work_struct notify_work;
+	struct work_struct notify_work_sc8180x;
 	struct work_struct register_work;
 
 	u8 read_buf[UCSI_BUF_SIZE];
@@ -223,6 +224,20 @@ static const struct ucsi_operations pmic_glink_ucsi_ops = {
 	.connector_status = pmic_glink_ucsi_connector_status,
 };
 
+static void pmic_glink_ucsi_notify_handle(struct pmic_glink_ucsi *ucsi, u32 cci)
+{
+	unsigned int con_num;
+
+	con_num = UCSI_CCI_CONNECTOR(cci);
+	if (con_num)
+		ucsi_connector_change(ucsi->ucsi, con_num);
+
+	if (ucsi->sync_pending &&
+		   (cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))) {
+		complete(&ucsi->sync_ack);
+	}
+}
+
 static void pmic_glink_ucsi_read_ack(struct pmic_glink_ucsi *ucsi, const void *data, size_t len)
 {
 	const struct ucsi_read_buf_resp_msg *resp;
@@ -259,10 +274,24 @@ static void pmic_glink_ucsi_write_ack(struct pmic_glink_ucsi *ucsi, const void *
 	complete(&ucsi->write_ack);
 }
 
-static void pmic_glink_ucsi_notify(struct work_struct *work)
+/* used everywhere except sc8180x */
+static void pmic_glink_ucsi_notify_ind(struct pmic_glink_ucsi *ucsi, const void *data, size_t len)
 {
-	struct pmic_glink_ucsi *ucsi = container_of(work, struct pmic_glink_ucsi, notify_work);
-	unsigned int con_num;
+	const struct ucsi_notify_ind_msg *msg;
+
+	if (len != sizeof (*msg)) {
+		dev_err_ratelimited(ucsi->dev, "Unexpected notification struct size %zd\n", len);
+		return;
+	}
+
+	msg = data;
+
+	pmic_glink_ucsi_notify_handle(ucsi, le32_to_cpu(msg->notification));
+}
+
+static void pmic_glink_ucsi_notify_work_sc8180x(struct work_struct *work)
+{
+	struct pmic_glink_ucsi *ucsi = container_of(work, struct pmic_glink_ucsi, notify_work_sc8180x);
 	u32 cci;
 	int ret;
 
@@ -272,14 +301,7 @@ static void pmic_glink_ucsi_notify(struct work_struct *work)
 		return;
 	}
 
-	con_num = UCSI_CCI_CONNECTOR(cci);
-	if (con_num)
-		ucsi_connector_change(ucsi->ucsi, con_num);
-
-	if (ucsi->sync_pending &&
-		   (cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))) {
-		complete(&ucsi->sync_ack);
-	}
+	pmic_glink_ucsi_notify_handle(ucsi, cci);
 }
 
 static void pmic_glink_ucsi_register(struct work_struct *work)
@@ -289,6 +311,24 @@ static void pmic_glink_ucsi_register(struct work_struct *work)
 	ucsi_register(ucsi->ucsi);
 }
 
+static void pmic_glink_ucsi_callback_sc8180x(const void *data, size_t len, void *priv)
+{
+	struct pmic_glink_ucsi *ucsi = priv;
+	const struct pmic_glink_hdr *hdr = data;
+
+	switch (le32_to_cpu(hdr->opcode)) {
+	case UC_UCSI_READ_BUF_REQ:
+		pmic_glink_ucsi_read_ack(ucsi, data, len);
+		break;
+	case UC_UCSI_WRITE_BUF_REQ:
+		pmic_glink_ucsi_write_ack(ucsi, data, len);
+		break;
+	case UC_UCSI_USBC_NOTIFY_IND:
+		schedule_work(&ucsi->notify_work_sc8180x);
+		break;
+	};
+}
+
 static void pmic_glink_ucsi_callback(const void *data, size_t len, void *priv)
 {
 	struct pmic_glink_ucsi *ucsi = priv;
@@ -302,7 +342,7 @@ static void pmic_glink_ucsi_callback(const void *data, size_t len, void *priv)
 		pmic_glink_ucsi_write_ack(ucsi, data, len);
 		break;
 	case UC_UCSI_USBC_NOTIFY_IND:
-		schedule_work(&ucsi->notify_work);
+		pmic_glink_ucsi_notify_ind(ucsi, data, len);
 		break;
 	};
 }
@@ -348,6 +388,7 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev,
 	struct device *dev = &adev->dev;
 	const struct of_device_id *match;
 	struct fwnode_handle *fwnode;
+	bool sc8180x_glink;
 	int ret;
 
 	ucsi = devm_kzalloc(dev, sizeof(*ucsi), GFP_KERNEL);
@@ -357,7 +398,7 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev,
 	ucsi->dev = dev;
 	dev_set_drvdata(dev, ucsi);
 
-	INIT_WORK(&ucsi->notify_work, pmic_glink_ucsi_notify);
+	INIT_WORK(&ucsi->notify_work_sc8180x, pmic_glink_ucsi_notify_work_sc8180x);
 	INIT_WORK(&ucsi->register_work, pmic_glink_ucsi_register);
 	init_completion(&ucsi->read_ack);
 	init_completion(&ucsi->write_ack);
@@ -406,11 +447,22 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev,
 		ucsi->port_orientation[port] = desc;
 	}
 
-	ucsi->client = devm_pmic_glink_register_client(dev,
-						       PMIC_GLINK_OWNER_USBC,
-						       pmic_glink_ucsi_callback,
-						       pmic_glink_ucsi_pdr_notify,
-						       ucsi);
+	sc8180x_glink = of_device_is_compatible(dev->parent->of_node,
+						"qcom,sc8180x-pmic-glink");
+
+	if (sc8180x_glink) {
+		ucsi->client = devm_pmic_glink_register_client(dev,
+							       PMIC_GLINK_OWNER_USBC,
+							       pmic_glink_ucsi_callback_sc8180x,
+							       pmic_glink_ucsi_pdr_notify,
+							       ucsi);
+	} else {
+		ucsi->client = devm_pmic_glink_register_client(dev,
+							       PMIC_GLINK_OWNER_USBC,
+							       pmic_glink_ucsi_callback,
+							       pmic_glink_ucsi_pdr_notify,
+							       ucsi);
+	}
 	return PTR_ERR_OR_ZERO(ucsi->client);
 }
 

-- 
2.39.2





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux